Wireless AP-3 User's Guide

Parameter Tables
A-98 Avaya Wireless AP-3 User’s Guide
NOTE:
The Heartbeat parameters are advanced settings not available via
the HTTP interface. When Heartbeat is enabled, the AP periodically
sends a message to the Syslog server to indicate that it is active.
The frequency with which the heartbeat message is sent depends
upon the setting of the Heartbeat Interval.
Syslog Host Table
The table described below configures the Syslog hosts that will receive
message from the AP. You can configure up to ten Syslog hosts.
Name Type Values
Access
CLI Parameter
Syslog Host Table Table N/A R sysloghosttbl
Table Index Integer 1 – 10 N/A index
IP Address IpAddress User Defined RW ipaddr
Comment (optional) DisplayString User Defined RW cmt
Status (optional) Integer enable
disable
delete
RW status