Multiservice Wan Access Router Module User's Guide

Interface Serial CLI Commands
Avaya X330WAN User’s Guide 139
show queueing
Use the show queueing command to display the priority queue size, in packets.
Syntax
show queueing [Serial <if-number>]
Parameters
Example
X330WAN-2DS1-1(super)# show queueing Serial 1
shutdown (X330WAN-2USP Serial interface context)
Use the shutdown command to shutdown the selected interface. The no form of this
command activates the selected interface.
Note: This command is executed from the Serial, Loopback, Fast Ethernet, and
Console interfaces.
Syntax
[no] shutdown
Note: The no shutdown option is not available in the Console interface.
transmitter-delay (X330WAN-2USP Serial interface context)
Use the transmitter-delay command to set the minimum number of flags
needed to recognize the end of one data frame. The
no form of this command
restores the default value, 0 flags, which is the shared flag mode.
Syntax
[no] transmitter-delay <number>
Parameters
Example
X330W-2USP-1(super-if:Serial2)# transmitter-delay 2
if-number
The port number of this interface, either 1 or 2.
number
An integer from 0-15. The minimum number of flags for recognizing
the end of one data frame and the beginning of the next.