Multiservice Wan Access Router Module User's Guide

Chapter 6 X330WAN CLI Commands
140 Avaya X330WAN User’s Guide
voip-queue (Serial interface context)
Use the voip-queue command to select custom queueing and queue sizes for VoIP
traffic. The
no form of this command restores the default priority queue’s size to the
default.
Syntax
[no] voip-queue
Frame Relay Configuration CLI Commands
This section contains a list of all Frame Relay configuration related CLI commands.
bc out (Map-class context)
Use the bc out command to set the committed burst size for the map-class Frame
Relay. The
no form of this command restores the default value.
Syntax
[no] bc out <bits>
Parameters
Example
X330WAN-2USP-1(super-map-class)# bc out 6000
be out (Map-class context)
Use the be out command to set the excess burst size for the map-class Frame Relay.
The
no form of this command restores the default value.
Syntax
[no] be out <bits>
Parameters
Example
X330WAN-2USP-1(super-map-class)# be out 6000
bits
The burst size in bits. The default is 7000 bits.
bits The burst size in bits. The default is 0 bits.