Multiservice Wan Access Router Module User's Guide

Policy CLI Commands
Avaya X330WAN User’s Guide 213
Parameters
Example
X330WAN-2DS1-1(super)# ip access-list-dscp precedence 101 16
mandatory
ip access-list-dscp trust
Use the ip access-list-dscp trust command to set a DSCP trust.
Syntax
ip access-list-dscp trust <policy-list-number> {untrusted | trust-cos
| trust-dscp | trust-cos-dscp}
Parameters
Note: To return to the default value, enter this command with trust-cos option.
Example
X330WAN-2DS1-1(super)# ip access-list-dscp trust 101 trust-dscp
ip access-list-name
Use the ip access-list-name command to set a name for a Policy list.
Syntax
ip access-list-name <policy-list-number> <name>
Parameters
Example
X330WAN-2DS1-1(super)# ip access-list-name 101 morning
policy-list-number
An integer from 100 to 149, where 0 is the default list.
dscp
DSCP entry, from 0 to 63.
precedence mandatory|optional
policy-list-number
An integer from 100 to 149. 0 is the default list.
policy-list-number
An integer from 100 to 149, where 0 is the default list.
name
List name.