Multiservice Wan Access Router Module User's Guide

Chapter 6 X330WAN CLI Commands
214 Avaya X330WAN User’s Guide
Note: To define a name that includes spaces, enclose the entire name in quotation
marks (e.g., “New York”).
ip access-list-owner
Use the ip access-list-owner command to set the owner for a specific Policy
list.
Syntax
ip access-list-owner <policy-list-number> <owner>
Parameters
Example
X330WAN-2DS1-1(super)# ip access-list-owner 101 admin
ip composite-op access
Use the ip composite-op access command to set the access value of a Policy
operation.
Syntax
ip composite-op access <policy-list-number> <composite-operation-
index> <access>
Parameters
Example
X330WAN-2DS1-1(configure)# ip composite-op access 101 17 forward
policy-list-number
An integer from 100 to 149, where 0 is the default list.
owner
List owner.
policy-list-number
An integer from 100 to 149, where 0 is the default list.
composite-operation-index
Index of operation in the table.
access forward | deny