Multiservice Wan Access Router Module User's Guide

Policy CLI Commands
Avaya X330WAN User’s Guide 215
ip composite-op dscp
Use the ip composite-op dscp command to set the DSCP value of a Policy
operation.
Syntax
ip composite-op dscp <policy-list-number> <composite-op-index> <dscp
value>
Parameters
Example
X330WAN-2DS1-1(configure)# ip composite-op dscp 101 17 52
ip composite-op name
Use the ip composite-op name command to set the name of a Policy operation.
Syntax
ip composite-op name <policy-list-number> <composite-op-index>
<OpName>
Parameters
Example
X330WAN-2DS1-1(configure)# ip composite-op name 101 17 gold-account
policy-list-number
An integer from 100 to 149, where 0 is the default list.
composite-op-index
Index of operation in the table.
dscp value
DSCP entry, an integer from 0 to 63. 64 signifies no change.
policy-list-number
An integer from 100 to 149, where 0 is the default list.
composite-op-index
Index of operation in the table.
OpName
The name of the Policy operation.