Multiservice Wan Access Router Module User's Guide

Enhanced Routing Capabilities
Avaya X330WAN User’s Guide 41
Configuration Example for Branch Office 1
The following is the configuration procedure for the X330WAN in Branch Office 1,
as shown in Figure 4.5:
X330WAN-2DS1-1(super)# interface Loopback 1
Done!
X330WAN-2DS1-1(super-if:Loopback1)# ip address 10.10.10.10 32
The Primary management interface has changed. Please copy the running
configuration to the start-up configuration file, and reset the WAN
router.
Done!
X330WAN-2DS1-1(super-if:Loopback1)# exit
X330WAN-2DS1-1(super)# copy running-config startup-config
X330WAN-2DS1-1(super)# reset
X330WAN-2DS1-1(super)# controller t1 1
Done!
X330WAN-2DS1-1(super-controller:1)# channel-group 1 timeslots 1-4
Done!
X330WAN-2DS1-1(super-controller:1)# exit
X330WAN-2DS1-1(super)# interface Serial 1:1
Done!
X330WAN-2DS1-1(super-if:Serial1:1)# ip address 10.49.70.1 24
Done!
X330WAN-2DS1-1(super-if:Serial1:1)# exit
X330WAN-2DS1-1(super)# interface FabricFastEthernet 1:1.1
Done!
X330WAN-2DS1-1(super-subif:FabricFastEthernet1:1.1)# ip address
10.87.56.1 24
Done!
X330WAN-2DS1-1(super-subif:FabricFastEthernet1:1.1)# exit
X330WAN-2DS1-1(super)# interface FabricFastEthernet 1:1.2
Done!
X330WAN-2DS1-1(super-subif:FabricFastEthernet1:1.2)# ip address
10.68.10.1 16
Done!
X330WAN-2DS1-1(super-subif:FabricFastEthernet1:1.2)# exit
X330WAN-2DS1-1(super)# interface FabricFastEthernet 1:2
Done!
X330WAN-2DS1-1(super-if:FabricFastEthernet1:2)# ip address
10.168.24.1 24
Done!
X330WAN-2DS1-1(super)# ip route 192.168.0.0 16 serial 1:1 permanent
Done!