User Manual

8
Step 3: Adapter configuration
1. Place the power adapter onto the adapter drawer in order.
2. Pass the DC-end of the adapter cable through the hole located on the back of
the adapter drawer.
3. Plug-in the AC-end of the adapter cable to the power AC socket.
4. Watch your hand when you place the chassis on the adapter drawer. Please
make sure the chassis is placed along the edge of the door lock. (The chassis
faces outwards, the door lock face inwards)
[Note]
 Please place the power adapter onto the adapter drawer in order, don’t stack
the adapters.
 For some device adapters that are not compatible with the power strip (EX:
e.g. iPad 8, iPad Air 4th generation), please contact AVer for help.