User Manual

13
Desk mount (Optional)
1. Remove the pre-installed screws on the top of cable grommet on each side
(See the figure as below for exact locations).
2. Determine the appropriate L- shaped mounting bracket location and fix
2 x L- shaped mounting bracket with screws.
3. Secure the station to the wall studs for drywall mounting. Drill the holes at the
wall studs through the drywall, and firmly tap 4 x drywall anchors in until they
are flush with the wall.
4. For concrete wall mounting, please use 4 x concrete anchors and fully flush
the anchors to the drilled holes.
5. Secure the charging station to the wall with 4 x anchor screws (with 4 x
washers).
[Note]
 Please note that the charging station needs to be placed on the desk. The
unit may be secured to the surface by inserting 2 screws appropriately.
 The station must be installed by a qualified technician. Use suitable mounting
means when installing to cinder block, concrete or drywall.
 It is recommended to use a screwdriver to loosen the screws.