Instruction manual

Using Supplies 3-1
USING SUPPLIES
The printer can use three types of supplies:
 Labels
 Tags
 Receipt Paper.
See “Selecting the Supply Type” in this chapter for more information.
There are two print modes. The way you load the supplies depends on the print mode you use.
 Peel mode removes the backing paper from the supplies as it prints the labels. This mode
allows you to apply the label immediately. It is only for labels. When using the on-demand
sensor, you can press the trigger to print a label or the next label prints automatically when
the previous one is removed.
 Non-Peel mode does not remove the backing paper. It is for labels printed in a continuous
strip, tags, and receipt paper.
Loading Supplies
To load supplies:
1. Turn on the printer.
2. Press the latch buttons and open the supply cover.
3. Pull back the supply lock tab.
3
Cover
Latch Buttons
Supply Lock Tab