Instruction manual

3-2 Operator’s Handbook
4. Open the spring-loaded supply holder. Spread the supply holder tabs apart with one hand so
it adjusts to the size of your supply roll. You can set it at 1.2”, 1.5”, and 2.0”.
5. Place the supply roll in the supply holder so the supply feeds labels from the bottom.
6. Load the supplies for the print mode you want. See “Loading for Peel Mode” or “Loading for
Non-Peel Mode” for more information.
Loading for Peel Mode
To load supplies for peel mode:
1. Peel and discard the first four inches of labels from the backing paper.
2. Hold the printer upright and gently press down on the label deflector. (It may be stiff.)
Supply Holder
Label Deflector