Instruction manual

1-2 Operator’s Handbook
Using this Manual
Following is a summary of the contents of this manual:
Chapter Contents
1 Introduction Information you should know before using the printer.
2 Using Batteries Charging, changing, and using batteries safely.
3 Using Supplies Supply loading and removal.
4 Entering and Printing Data Information about using the display, keypad, scanner, and printing.
5 Care & Maintenance Clearing supply jams and cleaning the printer.
6 Troubleshooting Common problems and their solutions.
A Specifications & Accessories Printer specifications and accessories/options.
Audience
This manual is for the operator who scans or manually enters data and prints and applies labels.
A Quick Reference for this printer is available in the box. A Programmer’s Manual and other
documentation are available on our Web site.
Information in this document supercedes information in previous versions. Check our Web site
for the latest documentation and release information.
Getting Started
To start using the printer, you must:
1. Review the safety information in the Regulatory Compliance document provided with your
printer.
2. Charge the main battery. See “Charging the Main Battery” in Chapter 2 for more
information.
Note: You must charge the battery before using it.
3. Insert the main battery. See “Changing the Main Battery” in Chapter 2 for more information.
4. Attach the safety strap found in the documentation package. See “Attaching the Safety
Strap” later in this chapter for more information.
5. Load supplies in the printer. See “Loading the Supplies” in Chapter 3 for more information.
6. Turn on the printer.
Note: Your System Administrator must load an application in the printer before you can use it.