Instruction manual

Using Batteries 2-1

USING BATTERIES

The printer uses two batteries: a main battery and a backup battery.

Battery Use

Main

Running the printer. It is also rechargeable using the Monarch 9462 single-station

or the Monarch 9465 four-station charger.

Backup Maintaining the printer’s system settings.

Using the Main Battery

The printer’s main power source is a 7.4V lithium-ion battery.

Note: The printer only takes this battery. Do not substitute batteries.

You must charge the battery when you receive the printer, even if you do not use it right away.

Charging the Main Battery

To charge the main battery, use either the 9462 single-station or 9465 four-station

battery chargers. Refer to the documentation provided with the chargers for more

information. Charging time is approximately 1.5 – 3 hours.

Warning: The battery might explode if placed on a different charger.

Changing the Main Battery

To change the main battery:

1. Turn the printer over and press the button on the battery compartment door (at the bottom of

the printer’s handle) and slide it open.

7. Turn the printer upright, holding your palm beneath the open battery compartment. Hit the

printer on your hand and catch the battery as it slides out.

8. Insert a new battery into the compartment (connector end first).

9. Slide the compartment door shut until clicks into place.

Battery Compartment Door

Button

Main Battery