465157 rev00 STOP ## Read through ALL instructions before commencing installation. If you have any questions about this product or issues with installation contact the customer services help line before returning this product to the store. See www.avfgroup.com/unimax for instruction video. CUSTOMER SERVICES HELP LINE NUMBER: +44 (0)1952 670009 (UK) 1-800 667 0808 (USA) 121lbs 55kg AVF Group Ltd.
Assembly Overview Fit Screen Hangers to TV Fitting the Wall Bracket Hanging the TV
Index 1 2 3 4 5 6 7 8 Measure the TV fixing holes Width and Height Fit Screen Hangers to TV Assemble Positioning Template Determine Bracket Hole Centres Marking Wall For Drill Points Fitting the Wall Bracket Fitting the Wall Bracket Covers Hanging the TV Retain all packaging in case the bracket needs to be returned. Contents may vary from photography/ Illustrations. You will not need all these parts, so expect there to be some left over depending upon the specification of your TV.
Tools Recommended Ø5.5mm (7/32") Masonry Ø10mm (25/64") Masonry Stud Finder Ø3.
TV Screws, Reducers and Spacers M4 45mm 25mm 16mm J x8 M4 M4 G1 x4 G2 x4 G3 x4 E1 x12 45mm 25mm 16mm H x4 M5 M5 I x4 K x4 E2 x4 M5 G4 x4 G5 x4 G6 x4 M6 M6 L x2 M x4 N x4 O x2 45mm 25mm 16mm F1 x4 M6 G7 x4 G8 x4 G9 x4 M8 M8 P x2 S 45mm 25mm 16mm F2 x4 M8 G10 x4 G11 x4 G12 x4 F3 x4 Q x2 R T
Remove the Wall Bracket Covers and keep for step 7 Wall bracket covers A1 & B1 are removed in the same way.
1 Measure the TV fixing holes Width and Height TV Fixing Holes X 200mm to infinity Y 100mm to infinity ! If width X is less than 200mm or height Y is less than 100mm STOP installation now and contact the customer help line You are provided with 4 diameters of TV fixing screws, M4, M5, M6 and M8. Determine the screw diameter that fits and remember for step 2.
2 Fit Screen Hangers to TV Once you have established which screw diameter you need for your TV you will need to choose which wall spacing you require. Check the back of your TV and use the OPTION that fits your TV. Please see page opposite for more details.
OPTION 1 12mm Wall Space Top Fixings M4 M5 Bottom Fixings M6 M8 G1 G4 G7 F1 F2 F3 C C M4 G10 C M5 M6 M8 G1 G4 G7 F1 F2 F3 C D D G10 D D OPTION 2 20mm Wall Space Top Fixings M4 M5 G2 M6 M8 G8 G5 F1 Bottom Fixings M4 G11 G2 F3 F2 M5 M6 G8 G5 F1 M8 F2 G11 F3 C C C C D D D D E1 E1 E1 E1 E1 E1 E1 E1 OPTION 3 40mm Wall Space Top Fixings M4 M5 M6 G6 G3 F1 Bottom Fixings M8 G9 F2 M4 G12 F3 M5 M6 G6 G3 F1 M8 G9 F2 G12 F3 C C
3 Assemble Positioning Template U1 U2 4 Determine Bracket Hole Centres Lay the template on the back of the TV and follow the instructions below. C Place the top row of holes on template U1 over hangers C. Mark off the top fixing centres The centre line of the template U2 represents the centre of your TV. Top row holes Line up with top of the screen.
5 Marking Wall For Drill Points Before marking the wall, determine the wall type that you have (i.e. Solid Wall/ Dot & Dab/ Plasterboard/ Wood Stud/Metal Stud). Ensure the drilling area is free from mains services (Gas/Electric/Water). Represents the top of your TV. T Represents the centre of your TV. Use your template to mark two points on the wall that correspond with the top fixing centres of your TV. Represents the bottom of your TV.
6 Fitting the Wall Bracket Use the correct fixings for your wall type. Mixing fixing screws may be required for installations that span different wall types. DO NOT OVER TIGHTEN SCREWS. Solid Wall Dot & Dab 10mm (25/64") 10mm (25/64") 75mm (3") 108mm (41/4") 5.5mm (7/32") Remove dust from holes 40mm (19/16") 40mm (19/16") MAX gap If gap is above 40mm (19/16) use plasterboard fixing method Remove dust from holes 12.
7 Fitting the Wall Bracket Covers On wall bracket covers A1 & B1 are 3 retaining tabs. These locate onto 3 retaining lips on wall brackets A & B and lock the wall bracket covers in position.
8 Hanging the TV Flat to Wall only Hanging the TV is a two person job. Present hangers C (on the back of the TV) to the opening on brackets A & B. Slide down and across into place. Ensure both hangers are fully engaged. If cables from the TV prevent the TV resting against the wall then an alternative hanger configuration will be required (see section 2). TV must be parallel to wall. Use spacers / stand-offs as shown in section 2.
Removing the Wall Bracket Covers Should you want to remove the wall bracket covers please follow the steps below.