Product specifications

Identifying and Replacing Failed Fans
138
5. To remove Fan 5A, do the following:
a. Remove the back cover by removing the top two (2) thumbscrews on the rear of the
server chassis. Then, you can have access to Fan 5A, as shown in the following
illustration:
b. Using a #2 Phillips screwdriver long enough to reach into the chassis, remove the three
(3) screws that hold down the Fan shroud.
c. Remove the two (2) screws that hold down the fan.
d. Pull the fan out of the chassis, and remove the Power harness attached to the fan.
e. Remove the fan from the chassis.