Product specifications

Configuration Requirements
4
Team Mode Configuration Requirements
This topic contains information on the requirements necessary when configuring AirSpeed 5000
in a Team mode.
If configuring for Team mode, you need to do the following:
• Configure the Avid Service Framework, as described in the topic “Configuring the Avid
Service Framework (for Standalone or Team Mode)” on page 6.
• In the Management Console on the AirSpeed 5000 Server, do the following:
- On the Record Template page, create a Record template that is customized for your
needs.
- On the Destination Template Page, create a Destination Template that uses a valid
workspace on your shared storage. You can set the Clip name and Tape ID if you want.
Other fields are not used.
- On the Record page, set channel configurations. You can ignore the Destination
template settings in Team mode, since you define this with the ‘transfer destination of
last resort’ located on the Inventory tab.
- On the User’s page, create users with the same credentials as the OS users that they will
be logged in as on the Avid Editor. This enables these users to access the AirSpeed 5000
server inventory via the AirSpeed 5000 Remote Console on the Avid Editor.
- On the Inventory page, select a Destination template for ‘Transfer destination of last
resort’. This is where the media will reside.
- On the Inventory page, select a workspace for ‘Master Clip Location (team)’. This is
where the .aaf clips reside.
• On the Avid Editor (Windows), you must do the following:
-Install AvidAirSpeed5000RemoteConsoleStandaloneSetup.exe.
- Install Interplay Transfer Client.
- Start the AirSpeed 5000 Remote Console application.
- Connect to a server.
- Verify Team Mode is configured properly.
For more information, see the AirSpeed 5000 Remote Console Operator’s Guide.