Product specifications

AirSpeed 5000 Server Hardware Upgrade Checklist

158

3. Using the supplied set screws and a #2 Phillips head screwdriver, do the following:

a. Align the holes in the codec to the standoffs on the Video I/O board

b. Firmly attach the first codec to the connector on the Video I/O board.

Codecs can only be placed one way.

c. (Option: For 4-channel model servers only) Repeat Step 3 for the second codec.

4. (Option: For 4-channel model servers only) Locate Video I/O board #2 (VIO 2), and place it

component side up (with the standoffs showing).

5. Using the supplied set screws and a #2 Phillips head screwdriver, do the following:

a. Align the holes in the codec to the standoffs on the Video I/O board

b. Firmly, attach the first codec to the connector on the Video I/O board.

Codecs can only be placed one way.

c. (Option: For 4-channel model servers only) Repeat Step 5 for the second codec.

When both codecs are screwed down to the Video I/O board, it will look like this:

6. The next step is to replace the Video I/O board(s) (with the new codec modules installed)

back into the server.

Codecs secured to Video I/O Board