Product specifications

AirSpeed 5000 Server Hardware Upgrade Checklist
161
7. Reattach the Card guide, and tighten the thumbscrews.
n
When reattaching the Card Guide, make sure the Video I/O boards and Hydra card (bottom), are
secured in their respective slots. This is an example of a 4-channel model server showing two
Video I/O cards.
8. (Option) Reattach any cables that were removed from any add-in cards.
9. Replace the server main cover, and tighten the thumbscrews. For more information, see
“Removing and Replacing the Server Main Cover” on page 152.
10. Reconnect all peripheral devices and the AC power cords into the server.
11. Power up the server.
12. Perform system diagnostics to make sure the codec has been applied properly, as well as to
make sure your system’s hardware is working properly. For more information, see
“Performing System Diagnostics” on page 162.
Make sure the board(s) and Hydra card (bottom)
t in the slot guides as shown