Product specifications

The Record Page

- Time Source For each channels 1-4, select the Time source from the list. Options are:

• ATC/VITC - Select this option if you want to use ATC or VITC for your time

code source.

If an invalid ATC/VITC source is supplied to the channel you select, the

Timecode will start with a value of “22:22:22:22”. Check to make sure

your video cable is connected. If you are using VITC, confirm that you are

set to the proper VITC Record Line for the video feed.

• Base - This is the Base time code. If you select this option, make sure that

you specify the time that you want the records to start in the Base TC field

below.

• LTC1-LTC4 - Select this option if you are supplying valid LTC source for the

individual channel.

If an invalid LTC source is supplied to the channel you select, the

Timecode will start with a value of “11:11:11:11”. Check to make sure

your LTC cable is connected, or confirm that your LTC source meets

proper specifications. For more information, see “Specifications” in the

AirSpeed 5000 Setup Guide.

• TOD - Select this option if you want to use the Time of Day source specified

on the Server Mode page.

• Force LTC1- Force LTC4 - Select this option if you want to override the

timecode source defined in a recording controlled Capture or Capture

Manager. When selected, AirSpeed 5000 will use the LTC present at the

channel input on the device and ignore the timecode setting sent by the

controller.

For example, you would select this option if you wanted to record the inputs

from one or more video/LTC sources using multiple AirSpeed 5000 channels

with Capture or Capture Manager. If the channel is configured for LTC rather

than ForceLTC, AirSpeed would only record using the TOD (Time of Day)

LTC source.

If an invalid LTC source is supplied to the channel you select, the

Timecode will start with a value of “11:11:11:11”. Check to make sure

your LTC cable is connected, or confirm that your LTC source meets

proper specifications. For more information, see “Specifications” in the

AirSpeed 5000 Setup Guide.

-VITC Record Line (Option) For each channel 1-4, if you are capturing VITC, select the VITC

record line number that you are supplying the VITC timecode on.

- Base Timecode (Option) If Base is selected in the Time Source field, type the time that you want

the records to start.

Use 00:00:00:00 format.

Field Description