User manual

5. Initial Settings
Initial setting through the Ethernet
1. Double click the EditV3.exe
IPEditV3 可修改Name / Gateway / IP / Netmask / HTTP Port1)
2. All the IP 9200 series, IP Kamera 9000 series/IP Video 9100 series in the same subnet of the
Ethernet will be found and be display in the window by the software. The default name of IP
MOTOR 9203 is IP MOTOR.
.
2- 1 : Change Name : MAXIMUM 10 DIGIT
2-2 : After Change Gateway , IP, Netmask (xxx.xxx.xxx.0 ~ xxx.xxx.xxx.254) or
Port1(1~32767) , the device will turn off DHCP 。
2-3 : Click the IP in Lists will open the webpage ，please type the IP Address if using Netscape
3. Click the equipment‘s name that you want to edit in the left of the window; it will turn fuscous,
the equipment’s name and IP address will display in the windows, you can rename (use numbers
and letters). After that, click the update button and the new setting will be work in 20 seconds.
- 10 -