User manual

AVIOSYS INTERNATIONAL INC IP MOTOR 9203 USER MANUAL
WWW.AVIOSYS.COM.
4. Double click the name of the equipment you want to control, the IE browser window will open
and connected to this equipment in that Ethernet automatically. You also can type the IP address
of the 9203 in the IE browser to open the web page of 9203. We suggest you to update the IE to
version 6.0 with SP1 or higher if your IE notices you the security level is too low to open that web
page.
NOTICE:
1. Make sure the RJ45 network wire have been connected correctly and the 9200, 9203
are power connect .
2. It can obtain the virtual IP address after you run the ipeditv3.exe only if the Ethernet
support DHCP. Click the IP address to enter the web page. If the Ethernet not support
DHCP, IP92XX will change it’s IP address to fixed IP address. Please follow the steps
below to change the subnet of your PC.
Use Windows XP to for example: Click My network neighborhood---->right
click---->property---->local network---->right click---->property ---->TCP/IP---->property,
like the figure:
The IP address of your computer should in the same subnet with that of IP Power
9212’s, so that you can open the web page of 9200. In the figure above, the IP address
of IP Power 9212 is 192.168.0.150, so your computer needs to gain an IP address
looks like 192.168.0.XXX to get connection to IP Power 9212.
The IP address of your computer should in the same subnet with that of IP MOTOR
9203’s, so that you can open the web page of 9203. In the figure above, the IP address of
IP MOTOR 9203 is 192.168.0.2, so your computer needs to gain an IP address looks
like 192.168.0.XXX to get connection to IP MOTRO 9203.
3.. The default username and password of IP Power 9212 are:
Username: admin
Password: 12345678
If forget the new password , you can key in superuser in username , and hardware reset the
device to set the default setting Password : 12345678 。( for security concern) ).
CUSTOMER HOTLINE: [phone]. VER. 1.0
- 11 -