User manual

AVIOSYS INTERNATIONAL INC IP MOTOR 9203 USER MANUAL
WWW.AVIOSYS.COM.
angle every 0.05 second. If you fill in it with number 2, it means the stepper motor run a rotation
angle every 0.02 second.
* Selecting Left or Right in the Direct blank, you can choose the rotation direction.
* Click “Apply” after the parameter setting finish , the motor will start rotating 。
2. Stop the unfinished rotation task
Having finished setting the parameter and click apply button, the stepper motor will start running.
You can stop the unfinished rotation by clicking the cancel or reset button.
* After you click cancel button, the stepper motor will stop but the parameter you set will be
saved. You can click apply button to make the stepper motor running again.
* After you click reset button, the stepper motor will stop and the parameter you set will be
cleared. You need to set the parameters again and click apply button to make the stepper motor
running again.
Setting the password for 9203
Click the change password option at the left window and you can enter the change password
page. Follow the instructions, fill in the old password and new password, then click the apply
button to confirm.
CUSTOMER HOTLINE: [phone]. VER. 1.0
- 13 -