User manual

Setting the IP address for 9203
1. Setting a fixed IP address for IP Power 9202.
Click the setup option in the left side of the window and you can enter the setting web page.
Then follow the instructions fill in the new IP address, mask, and gateway for IP Sensor 9201,
disable the DHCP service, click the submit button to confirm.
Notice：
1)The format of IP Address : xxx.xxx.xxx.xxx: yyyyy，the port range of yyyyy is 1~32767。
2) The range of Subnet Mask is xxx.xxx.xxx.0 ~ xxx.xxx.xxx.254。
3) If disable DHCP , you can set TCP Port and Default Gateway；the default port of DHCP
Enable is xxx.xxx.xxx.xxx:80，and the Default Gateway is supply by server 。
4) If use the port other than 80 , you need to key full address
http://xxx.xxx.xxx.xxx:yyyyy in IE/
Netscape ，or use the attached program IPEditV3.exe to login.。
- 14 -