User manual

7. Control the 9203 through SDK
You can control the 9203 through the web page, and you can also control the rotation of 9203 by
program. You can announce and quote the functions provide by us in VB or VC, associate it to
the other equipment to build your own control system.
Insert the install disk to your CD-ROM, it will run automatically and pop up the figure below:
Click the driver button in the left side, and click 92xx series (VC) SDK or 92xx series (VB) SDK
in the pulldown menu; it will pup up the figure like bellows in the right side:
Click application, you can enter the VC or VB operation interface (Attention: you should use the
ipedit.exe to find the IP address of 9203 and fill it to the interface of VB or VC first). Please
reference the SDK Manual (Chinese) in this web page for details.
You can get the root resource program by clicking SDK (Visual C++ 6.0) or SDK (Visual Basic
6.0).
Note ︰When use the VC or VB interface , user of IP MOTOR 9203 only need to setup Input ip
address and IP MOTOR Setting parts 。
- 18 -