User manual

AVIOSYS INTERNATIONAL INC IP MOTOR 9203 USER MANUAL
WWW.AVIOSYS.COM.
4. Hardware & Software installation
Before you start to use IP MOTOR 9203, please follow the steps below:
 Check the package to make sure the contents is complete.
 prepare one Ethernet HUB, or Router
 Check the voltage of the power supply to make sure it is AC 110-240 volt.
Hardware Installation
1. Connect the 9200 to HUB through network wire
2. Connect the 9200 to 9203 through D-SUB cable by black jack.
CUSTOMER HOTLINE: [phone]. VER. 1.0
- 7 -