Owner manual

Replacing the Snap-in Pad Module

After scanning many and many pages through the ADF, the pad may be worn out

and you may experience problems with document feeding. In this case, it is highly

recommended to replace the pad module with a new one. For ordering the pad

module, please consult your nearest dealer and follow the procedure below to

replace it.

Disassembling Procedure

1. Gently open the ADF front cover.

2. Remove the ADF snap-in pad module by pressing the lock upward.

ADF Pad

Assembling Procedure

1. Gently open the ADF front cover to the left.

2. Remove the ADF pad module from the box.

3. Place it into the holes until it snaps into place.