Owner manual

Scanning From A Touch Of The Start Button

1. Place the original document face down on the flatbed glass and align it in the

upper-left corner.

2. Press the Scan button to enter scan mode.

3. The LCD screen displays the following Scan To message. Press the arrow

buttons to select your desired destination application, for example, Microsoft

Paint.

Scan To 3-Paint

Press W X, Start

4. Press Start on the product to start scanning.

5. After the scanning is finished, the designated application will be launched and

the scanned image appears in the main window of the designated application

(For example, Microsoft Paint) as below.