Owner manual

Enabling the Backup Function
This product allows you to save all the printing or copying jobs in a computer which
is connected to this product via a USB cable. To save all the printing or copying jobs,
you need to enable the Backup function.
To enable the backup function,
1. Press the Menu button on the control panel. The LCD screen shows the
following Menu screen.
Menu/to select
Press WX, Num
2. Press the Set button, the Left-arrow or the Right-arrow button. The LCD screen
shows “1. Common Setup”.
1. Common Setup
Press WX, Set
3. Press the Left-arrow or the Right-arrow button repeatedly until the following
screen is displayed.
16. Backup
Press WX, Set
4. Press the Set button and the arrow key until the LCD screen shows “ON”.
ON
Press WX, Set
5. Press the Set button to save the setting.
6. Press the Stop/Clear button to leave the menu screen and enter the operation
mode.
131