Owner manual

Scanning and Sharing Your Document

To scan and send your document to the product’s memory,

1. Place your document either on the flatbed glass or into the ADF input tray.

2. Press the SCAN button on the control panel to use the scan mode.

3. Press the Right-arrow or the Left-arrow buttons until Net Scan appears. The

LCD screen shows the following screen.

Net Scan

Press W X, Start

4. Press the Start button, and then the display asks you to input an ID number.

For example, input your ID number, 123 by the Numeric pad.

ID:123

Press Num, Set

5. Press the Set button. The LCD screen shows the following display.

Scan: Parameter 3

Press W X, Start

If the ID number has already existed in the product memory, the LCD screen

will return to the previous screen to enter another ID number.