Operation Manual

AV220 User’s Manual
6-3
6.2 Questions and Answers
Question: Paper becomes jammed during scanning.
Answer: 1) Open the scanner front door.
2) Pull out the jammed paper carefully.
3) Close the scanner front door.
Question: More than one sheet of paper are fed into the
scanner.
Answer: 1) Open the scanner front door.
2) Remove the multi-fed sheets of paper.
3) Close the scanner front door.
4) Flatten the corners and edges. Loosen the paper
before putting it into the paper guide again.
5) Check the feeding roller condition. If necessary,
follow the cleaning directions in section 5.1 and
perform the cleaning.
Question: Paper becomes skewed in the scanner.
Answer: 1) Use the slide guide to keep the paper path straight.
2) Check the condition of the feeding roller. If
necessary, follow the cleaning directions in Section 5.1
and perform the cleaning.
Question: Why is it my scanned image always comes out too dark?
Answer: 1) Modify the Gamma setting to 1.8 for your monitor
and, when printing, set Gamma to 2.2 for your printer.
2) Use the Brightness setting of the TWAIN user
interface to get a brighter image.