Instruction Manual

ManualsBrandsAvlink ManualsAccessories for videoDVI-ED

DVI

EXTENDER

(Support EDID copy)

DVI-LD

(Local)

DVI-R

(Remote)

USER MANUAL V1.2

DVI-ED

Package Contents-

 DVI Extender Local Unit

 DVI Extender Remote Unit

 1 user manual

 2 power adapter DC 5V 1A

Anything missed, please contact with your vendor.

Introduction

The extension of DVI-ED video signal device up to 30/50

meter away by using DVI extender and one CAT.5 cable,

and it support “EDID COPY” ability. The DVI-LD can read

and remember the EDID of your monitor by you push

“EDID COPY” button. Make the PC send out the beat

resolution to match monitor for your application.

DVI extender is ideal for:

 Test bench facilities

 Data Center

 Help desks

Features

 PC resolution to 1600x1200 60Hz / 30 meter.

 PC resolution to 1280x1024 60Hz / 50 meter.

 Support DVI-D.

 Support EDID copy.

 Use CAT.5 cable to install easily.

Specifications

Function DVI-LD

DVI-R

Input Connector 1 DVI Female 1 RJ-45 Female

Output Connector 1 RJ-45 Female 1 DVI Female

Max. Resolution

1600x1200 60Hz /

1280x1024 60Hz

Cable Distance 30/50 m (Max.)

Power Adapter (Min.) DC 5V 1A

Housing Metal

Weight 141g

Dimensions (LxWxH) 67x52x38 mm

-1-

LOCAL FRONT VIEW

1. “DVI In” Port

2. Power Jack

LOCAL REAR VIEW

1. Power LED

2. “EDID COPY” Button

3. “CAT.5” Port

REMOTE FRONT VIEW

1. “DVI Out” Port

2. Power Jack

REMOTE REAR VIEW

1. Power LED

2. “CAT.5” Port

-2-

Summary of content (2 pages)

PAGE 1
DVI EXTENDER (Support EDID copy) Introduction The extension of DVI-ED video signal device up to 30/50 meter away by using DVI extender and one CAT.5 cable, and it support “EDID COPY” ability. The DVI-LD can read and remember the EDID of your monitor by you push “EDID COPY” button. Make the PC send out the beat resolution to match monitor for your application. DVI extender is ideal for: Test bench facilities Data Center Help desks LOCAL FRONT VIEW 1. “DVI In” Port 2.
PAGE 2
Wiring Information & Coding Installation 1. Turn off the PC and monitor. 2. Plug the 5V power supply into the DVI-LD and DVI-R. 3. Turn on the monitor, and connect monitor to the “DVI In” port on the DVI-LD with DVI cable. 4. Push “EDID COPY” button had completed EDID read/Write after LED flash 3 times. 5. Remove the monitor cable from the DVI-LD and plug in the “DVI Out” port on the DVI-R. 6. Connect the CAT.5 cable between the DVI-LD “CAT.5” port and the DVI-R “CAT.5” port of extender. 7. Turn on the PC.