User Manual

Installation
1. Turn off the PC and monitors.
2. Connect the PC and the “video in” port of Distribution
Amplifier.
3. Connect the PC and the “audio in” port of Distribution
Amplifier.
4. Connect the HD-15 video extension cables between the
monitors and the “video out” ports of Distribution
Amplifier.
5. Plug the 3.5φearphones into the “audio out” ports of the
Distribution Amplifier.
6. Turn on the PC and monitors.
Note:
 If you install the DDC monitor for the splitter, the rest of
monitors must be the same resolution as the DDC
monitor.
 Available monitors include the VGA, SVGA, XGA, QXGA,
UXGA Multisync, and exclude the CGA, EGA, Mono.
Operation for cascade:
1. The function to display identical image on more monitors,
you request to attach another Distribution Amplifier.
2. Connect the “video out” port of the former Distribution
Amplifier and the “video in” port of the latter Distribution
Amplifier.
Note:
Even though you are allowed to cascade the Distribution
Amplifier with varied ports, the image might become
unstable if cascade too many tiers of Distribution Amplifier.
P.S.: The example cascades the 2 ports Distribution
Amplifier; however, you can cascade the video/audio
Distribution Amplifier with demanded port.
-3-
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or registered
trademarks belonging to their respective companies.
-4-