FRITZ!Box 3272 www.avm.de © AVM GmbH · Alt-Moabit 95 · 10559 Berlin · Telefon 030 39976-0 · info@avm.
Table of Contents Symbols and Highlighting . . . . . . . . . . . . . . . . . . . . . . . . 6 1 The FRITZ!Box 3272 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2 Ports, Interfaces, Buttons and LEDs . . . . . . . . . . . . . . . . 8 2.1 2.2 2.3 Ports and Interfaces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 LEDs . . . . . . . . . . . . . . . . . .
7 Configuring an Internet Connection in the FRITZ!Box . . 32 7.1 7.2 7.3 7.4 7.5 Configuring an Internet Connection for DSL . . . . . . . . . . . . . . . . . . . 32 Configuring the Internet Connection for Cable. . . . . . . . . . . . . . . . . 33 Configuring an Internet Connection for the Mobile Network. . . . . . 33 Configuring the Internet connection over LAN 1: FRITZ!Box as a router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Surfing the Net . . . .
11.10 Mobile Network: Replace Faulty DSL . . . . . . . . . . . . . . . . . . . . . . . . 74 12 FRITZ!Box as a Wireless Access Point . . . . . . . . . . . . . . 76 12.1 12.2 12.3 12.4 12.5 Connecting Wireless LAN Devices Securely with the FRITZ!Box . . . 76 Connecting Wireless Devices with the FRITZ!Box Guest Access . . . 78 Switching the Wireless Radio Network On and Off by Schedule. . . 79 Extending a Wireless LAN Network . . . . . . . . . . . . . . . . . . . . . . . . . .
18 Help in Case of Errors . . . . . . . . . . . . . . . . . . . . . . . . . . 113 18.1 18.2 18.3 The User Interface Does Not Open . . . . . . . . . . . . . . . . . . . . . . . . . 113 Cannot Establish a Wireless LAN Connection . . . . . . . . . . . . . . . . 117 Wireless LAN Connection Interrupted. . . . . . . . . . . . . . . . . . . . . . . 118 19 Taking FRITZ!Box out of Operation . . . . . . . . . . . . . . . . 120 19.1 19.2 Restoring Factory Settings. . . . . . . . . . . . . . . . . . . . . . . .
Symbols and Highlighting Symbols and emphasized text are used to mark certain information in this manual. Symbols This symbol marks useful hints and tips. This symbol indicates important instructions that must be observed to avoid malfunctions.
The FRITZ!Box 3272 1 The FRITZ!Box 3272 Welcome! We are pleased you decided on a FRITZ!Box. The FRITZ!Box 3272 is the hub of your home network, connecting your computers and network devices with the Internet. You can operate the FRITZ!Box on a DSL line as an Internet router. The FRITZ!Box is equipped with ports for computers and USB devices and supports wireless LAN technology. This means you can use the FRITZ!Box as a wireless LAN access point for wireless devices like notebooks, tablets or smartphones.
Ports, Interfaces, Buttons and LEDs 2 Ports, Interfaces, Buttons and LEDs This chapter describes the ports, interfaces, buttons and LEDs of the FRITZ!Box. 2.1 Ports and Interfaces WLAN DSL 2 x Gigabit LAN 2 x LAN 2 x USB 2.
Buttons • Wireless access point Integrated wireless LAN access point for connecting to wireless devices that use the radio standard IEEE 802.11b, IEEE 802.11g or IEEE 802.11n in the 2.4GHz frequency band 2.2 Buttons The FRITZ!Box has two buttons on the top of the housing. Info DSL LAN Power WLAN WLAN WPS FRITZ!Box buttons WLAN Button With the “WLAN” button you can turn the wireless LAN function on and off.
LEDs 2.3 LEDs Five LEDs are built into the top of the FRITZ!Box 3272, which flash or light up to display various connection statuses and events.
Before You Connect the FRITZ!Box 3 3.1 3.2 Before You Connect the FRITZ!Box • Check the contents of your FRITZ!Box package. See the section Contents of the FRITZ!Box Package on page 11 for more information. • Make sure that the requirements for connecting and operating the FRITZ!Box have been met. See the section Requirements for Operation on page 11 for more information. • Please see the security and handling instructions in the section Security and Handling on page 12.
Security and Handling • for the wireless LAN connection to tablets, smartphones and computers: Tablets, smartphones or computers that support wireless LAN (compliant with IEEE 802.11n, IEEE 802.11g or IEEE 802.11b). Computers that do not have wireless LAN integrated can be equipped with wireless LAN support by installing a wireless LAN device like a FRITZ!WLAN USB Stick, for instance.
Security and Handling – The FRITZ!Box should not be placed on a carpet or on upholstered furniture. – Do not cover the FRITZ!Box. • Do not place the FRITZ!Box on excessively heat-sensitive surfaces, as the base of the device can heat up during normal operation. • • Do not install the FRITZ!Box during an electrical storm. • Never let liquids get inside the FRITZ!Box. Otherwise, electric shocks or short circuits may result. • Do not open the FRITZ!Box housing.
Connecting the FRITZ!Box 4 Connecting the FRITZ!Box • • Connect the FRITZ!Box to the power supply. Connect the FRITZ!Box to your Internet connection. This chapter tells you how. Before you connect the FRITZ!Box, note the additional instructions in the section Security and Handling on page 12. 4.1 Connecting to Electrical Power r e w o P N A L W N A L D L S fo In 1 LA LANN 1 2 LA LANN 2 3 LA LANN 3 4 LA LANN 4 Connecting to the power supply 1.
Connecting to the Internet 4.2 Connecting to the Internet The FRITZ!Box can be connected using various types of Internet connections: • • • DSL line Internet cable access using a cable modem Internet via mobile network using a UMTS/HSPA modem Connecting to the DSL line r e w o P L A N W L A N L S D Po N LA fo er w In N LA W SL D fo In 1 LA LANN 1 2 LA LANN 2 3 LA LANN 3 4 LA LANN 4 Connecting to a telephone socket 1. Pick up the DSL cable (gray) included in the package. 2.
Connecting to the Internet 4. Set up the Internet connection for connections via cable in the FRITZ!Box (see page 33). Connecting to the Internet via the Mobile Network If no other kind of Internet connection is available, you can use your FRITZ!Box to connect to the Internet via the mobile communications network. A USB modem for mobile Internet access (UMTS/HSPA) is required for this. The FRITZ!Box supports UMTS/HSPA modems from various manufacturers. 1.
Connecting the Computer to the FRITZ!Box 5 Connecting the Computer to the FRITZ!Box You can connect a computer with the FRITZ!Box either using a network cable or wirelessly over wireless LAN. A computer can be connected with the FRITZ!Box using only one of these methods. It is not possible to connect using the network cable and wireless LAN. 5.
Connecting Computers to the LAN Port Connecting to Other Computers To connect other computers to the network ports, additional network (LAN) cable is required. In purchasing a LAN cable, note the instructions in the section Network Cable on page 124. One computer can be connected to each network port of the FRITZ!Box. Connecting a Network Hub or Switch You can also connect a network hub or switch to the LAN ports on the FRITZ!Box.
Connecting Computers Wirelessly over Wireless LAN 5.2 Connecting Computers Wirelessly over Wireless LAN Using wireless LAN radio technology you can connect multiple computers with the FRITZ!Box wirelessly. Please note the following before establishing a wireless connection between the computer and the FRITZ!Box: • Wireless device A computer to be connected to the FRITZ!Box via wireless LAN must support wireless LAN. This means it must be equipped with a wireless LAN device.
Connecting Computers Wirelessly over Wireless LAN Establishing a Wireless LAN Connection Using WPS The FRITZ!Box supports WPS (Wi-Fi Protected Setup). Wireless devices that also support WPS can be connected with your FRITZ!Box securely using this method. All of the necessary wireless LAN security settings are transferred in the process. There are two kinds of WPS: the push-button method and the PIN method.
Connecting Computers Wirelessly over Wireless LAN You can choose between two methods: • • The FRITZ!Box Specifies the PIN the wireless LAN device specifies the PIN. The FRITZ!Box Specifies the PIN 1. Open the FRITZ!Box user interface. 2. Select the “WLAN / Security” menu. 3. Go to the “WPS Quick Connection” page. 4. Enable the setting “WPS enabled”. 5. Select the option “PIN method (WPS-PIN), the FRITZ!Box specifies the PIN”. 6. The PIN will be displayed.
Connecting Computers Wirelessly over Wireless LAN The “WLAN” LED on the FRITZ!Box flashes slowly, indicating that the WPS procedure has begun. Now a secure wireless LAN connection is being established between the FRITZ!Box and the wireless LAN device. Establishing a Wireless Connection with AVM Stick & Surf If you use a FRITZ!WLAN USB Stick from AVM as the wireless LAN device, you can use AVM Stick & Surf to establish a secure wireless LAN connection quickly and conveniently. 1. Switch on your computer.
Connecting Computers Wirelessly over Wireless LAN Transferring the Wireless LAN Security Settings Manually The wireless LAN security settings for wireless devices can also be transferred manually. Manual transfer is unavoidable if a wireless LAN device does not support any methods for transferring the security settings automatically. For manual transfer the wireless LAN security settings have to be entered in the wireless LAN software.
Connecting Computers Wirelessly over Wireless LAN values set in the FRITZ!Box. If you changed the preconfigured values in the FRITZ!Box, then enter these changed values in the wireless LAN software. 3. SSID (name of the wireless radio network) FRITZ!Box 3272 Encryption method WPA2 (AES-CCMP) Encryption WPA2-PSK (AES) Key The key is printed on the sticker attached to the bottom of housing.
Connecting Computers Wirelessly over Wireless LAN 7. Close the user interface and clear the connection between the FRITZ!Box and the computer. Remove the network cable (yellow ). 8. Configure your wireless LAN device with the security settings entered in the FRITZ!Box. The wireless LAN connection between your wireless device and the FRITZ!Box will be established. We strongly recommend using a wireless LAN device that supports WPA or WPA2 (for instance, a FRITZ!WLAN USB Stick from AVM).
The FRITZ!Box User Interface 6 The FRITZ!Box User Interface The FRITZ!Box has a user interface you can open in a web browser on your computer. In the user interface you can set up the FRITZ!Box, enable or disable functions and receive information on the FRITZ!Box and on your connections. 6.1 Opening the User Interface The FRITZ!Box user interface can be opened on every computer connected with the FRITZ!Box. 1. Start a web browser on your computer. 2. Enter fritz.
Configuring FRITZ!Box with the Wizards In the middle area of the window information is presented about connections, ports, and configured convenience functions. In the lower are of the window this information is rounded out with the list of connected devices. 6.3 Configuring FRITZ!Box with the Wizards The FRITZ!Box puts a number of Wizards at your disposal to assist you in setting up your FRITZ!Box. You will be guided through dialogs and menus step by step.
Standard View and Advanced View 6.4 Standard View and Advanced View The FRITZ!Box user interface has two views: the standard view and the advanced view. Upon delivery, the FRITZ!Box interface is set to display the standard view. In the standard view all of the settings required for everyday operation of the FRITZ!Box are at your disposal. Some pages and areas of the FRITZ!Box user interface are not displayed. In the advanced view additional settings options appear under various menus and commands.
Saving the FRITZ!Box Settings 5. Enter a password of your choice in the “Password” field and then click “Save Settings”. A password must be entered only if you would like to transfer the settings of this FRITZ!Box to another FRITZ!Box. 6. In the next windows, confirm that the backup file should be saved by clicking “OK”. Click “Next” to conclude the backup of your settings.
Saving the FRITZ!Box Settings A password must be entered only if you would like to transfer the settings of this FRITZ!Box to another FRITZ!Box. 3. Click “Save” and save the “FRITZ!Box[...].export” file on your computer or on another storage medium. This concludes the saving of your FRITZ!Box settings. Restore Settings When settings from a backup file are restored, all of the current settings of the FRITZ!Box are overwritten. 1. Open the “System / Save Settings” menu. 2. Switch to the “Restore” tab.
Saving the FRITZ!Box Settings 3. Enter the password. 4. Click “Browse” and select a backup file. 5. Click “Source File”. When the backup file is loaded you will receive an overview of all settings that you can apply to the FRITZ!Box. Settings that do not match your FRITZ!Box or which are already configured in your FRITZ!Box will not be offered for application. 6. Select from the list the settings to be adopted. 7. Click “Apply”. The selected settings are loaded to the FRITZ!Box.
Configuring an Internet Connection in the FRITZ!Box 7 Configuring an Internet Connection in the FRITZ!Box Once you have connected the FRITZ!Box to your Internet connection, you must configure the Internet connection in the FRITZ!Box user interface so that the FRITZ!Box can establish the connection to your Internet service provider and connect to the Internet.
Configuring the Internet Connection for Cable Configuring an Internet Connection without the Wizard Choose this method if the FRITZ!Box is connected to a DSL modem or a DSL router, or integrated into an existing network. 1. Open the FRITZ!Box user interface (see page 26). 2. On the “Overview” page, select the “Advanced View”. 3. Select the “Internet / Account Information” menu and enter your account information. Also take advantage of the Help available in the FRITZ!Box user interface. 7.
Configuring the Internet connection over LAN 1: FRITZ!Box as a router The “Mobile Communications” menu is not available until the UMTS/HSPA modem has been connected to the USB port of the FRITZ!Box. 3. Select the setting “Mobile connection enabled”. 4. Configure the settings for your Internet connection over the mobile communications network. For more information, see the Online Help of the FRITZ!Box.
Configuring the Internet connection over LAN 1: FRITZ!Box as a router 3. Select the “Internet / Account Information” menu. 4. Select the “Existing connection over LAN” entry from the “Internet Service Provider” drop-down list. 5. Click “Apply”. When the settings are applied the network address range of the FRITZ!Box changes automatically. The FRITZ!Box is configured as a router and the network range is changed.
Surfing the Net 7.5 Surfing the Net Once you have set up the Internet connection in your FRITZ!Box, you can surf the Internet with any computer connected to the FRITZ!Box. 1. Start a web browser on your computer. 2. Enter in the address field the URL of the web page you would like to visit, for instance avm.de/en. The requested Internet page is opened and displayed.
Password Protection: Security for the FRITZ!Box 8 Password Protection: Security for the FRITZ!Box The password protection for the user interface is a security feature of your FRITZ!Box. This section describes how to use a password for the FRITZ!Box user interface and why you should use password protection. For more information on safe handling of the FRITZ!Box, see the AVM web site at avm.de/en/Security. The FRITZ!Box Password and FRITZ!Box Users The FRITZ!Box password protection has two levels.
Password Protection: Security for the FRITZ!Box Selecting the Appropriate Password Protection Use the table below to compare the two FRITZ!Box login methods and decide which is appropriate for you: Features FRITZ!Box Password FRITZ!Box User Password One shared password for all Every user uses his own users. password.
A single FRITZ!Box Access for All Users Using a Secure Password Regardless of whether you use the FRITZ!Box password or a FRITZ!Box user account to log in to your FRITZ!Box, be sure to use a password that fulfills the following criteria: • • Assign a password that’s easy for you to remember. Use a password with at least eight characters, which includes capitals and lower-case letters as well as numerals and special characters.
Individual Access for Each FRITZ!Box User Quick Access to the Login Data At the top of the FRITZ!Box user interface is a navigation bar that allows users to switch between the views of the FRITZ!Box. If you use the FRITZ!Box password, you will see the entry “Logged in” on the left of the window. Click on the blue triangle to open a drop-down menu that offers easy access to the basic functions of your FRITZ!Box: • Change password Select this entry to change the FRITZ!Box password.
Individual Access for Each FRITZ!Box User Setting Up FRITZ!Box Users You can set up as many as 32 user accounts in the FRITZ!Box. Before you can select the “Login with FRITZ!Box user name and password” method in the “System / FRITZ!Box Password / Login from Home Network” menu, you have to set up a FRITZ!Box user with the right to configure the FRITZ!Box. Setting Up FRITZ!Box Users with Configuration Rights 1. In the FRITZ!Box user interface, open the “System / FRITZ!Box Password / FRITZ!Box Users” menu.
Individual Access for Each FRITZ!Box User Password protection is enabled in your FRITZ!Box. Setting Up More FRITZ!Box Users 1. In the FRITZ!Box user interface, open the “System / FRITZ!Box Password / FRITZ!Box Users” menu. An alphabetical list of the FRITZ!Box user accounts will be displayed. Click the buttons after each list entry to view, change, or delete the corresponding user account. 2. Click the “Add User” button. 3. Enter a name, a valid e-mail address and a password for the new user.
Individual Access for Each FRITZ!Box User Rights for FRITZ!Box Users Read here which contents of the FRITZ!Box the user can access with which rights. • FRITZ!Box configuration After logging in from the home network, with these rights the user can open the fritz.box or view of the FRITZ!Box user interface. Here he can see and edit all settings. Configuration rights automatically include the right to access voice messages, faxes, FRITZ!App Fon and the call list.
Individual Access for Each FRITZ!Box User • The option “ Internet access to the FRITZ!Box via HTTPS enabled” is selected in the “Internet / MyFRITZ!” menu, or in the “Internet / Permit Access / FRITZ!Box Services” menu. When the MyFRITZ! service is enabled this checkmark is set automatically. A FRITZ!Box user who has been granted Internet access can use the MyFRITZ! (myfritz.net) service to access the corresponding FRITZ!Box from any location.
Individual Access for Each FRITZ!Box User Preconfigured FRITZ!Box User: ftpuser The first time you open the overview of user accounts under “System / FRITZ!Box Password / FRITZ!Box Users”, the user “ftpsuser” is already listed. This is because the FRITZ!NAS service, in which the storage media connected with the FRITZ!Box are summarized, can also be accessed over the SAMBA and FTP protocols.
Individual Access for Each FRITZ!Box User • Change e-mail address Select this entry to assign a different e-mail address to the current user account. • Change password Select this entry to change the password of the current user account. • Log Off Select this entry if you would like to leave the FRITZ!Box user interface. Log off of the FRITZ!Box before you surf the web with your browser.
Forgotten Password: What To Do 8.3 Forgotten Password: What To Do If you have forgotten your password for the user interface, for reasons of security, you have to restore the factory settings to your FRITZ!Box. This will discard all of your settings. Afterwards you will have to reconfigure your Internet connection and all personal network and network device settings. Here is how to restore the factory settings to the FRITZ!Box: 1. Disconnect the FRITZ!Box from the power supply. 2.
Using the FRITZ!Box without a Password 8.4 Using the FRITZ!Box without a Password From within the home network you can operate the FRITZ!Box user interface without enabling password protection. This means that every user who accesses the interface of your FRITZ!Box can view and change all information and settings. In the “No login” mode, your private information is not sufficiently protected from malicious programs or unwelcome activities.
MyFRITZ!: Global Access to the FRITZ!Box 9 MyFRITZ!: Global Access to the FRITZ!Box MyFRITZ! is a web service by AVM, with which you can access your FRITZ!Box from anywhere in the world over the Internet, just as if you were at home. This chapter describes what MyFRITZ! does and how to configure MyFRITZ!. Using FRITZ!Box from On the Go Using the web browser of any computer, tablet or smartphone, accessing your FRITZ!Box from anywhere is safe and simple.
Configuring MyFRITZ! Setting Up a MyFRITZ! Account To set up a MyFRITZ! account, use a computer that fulfills the following requirements: • • The computer is connected with the Internet. You can access to your e-mail on this computer. Set up the MyFRITZ! account in the FRITZ!Box user interface: 1. Open the FRITZ!Box user interface (see page 26). 2. Select “Internet / MyFRITZ!”. 3. Select “Create new MyFRITZ! account”. 4. Enter your e-mail address.
Using MyFRITZ! 7. You receive an e-mail from MyFRITZ! containing a registration link. If possible, open the e-mail on the computer on which you began setting up the account. Click the registration link. 8. You are forwarded to the MyFRITZ! website, where you are prompted to read the terms of use and activate the account. Once the account has been activated successfully, you will be redirected to your FRITZ!Box user interface. Now the FRITZ!Box is registered with your MyFRITZ! account.
Using MyFRITZ! If you have enabled the right to access FRITZ!NAS for FRITZ!Box user account you are using, via the MyFRITZ! page you can access the storage media you released for sharing. MyFRITZ! over a Smartphone or Tablet With the MyFRITZ!App from AVM you can use the MyFRITZ! web service on the following devices: • Android smartphones or Android tablets with Google Android 2.2 or later • iPhone (model 3GS or later) or iPod touch (3rd generation or higher) or iPad with iOS 5.0 or later.
Using MyFRITZ! MyFRITZ! in the Home Network You can also use MyFRITZ! in the FRITZ!Box home network. 1. Enter in the address field of your browser. 2. Log in to your FRITZ!Box. Depending on the registration method you set for the home network, you must enter the FRITZ!Box password or the user name and the password of the FRITZ!Box user account. You will be directed to the MyFRITZ! page of your FRITZ!Box. In this case you no registration with MyFRITZ! is required.
Security with MyFRITZ! 9.3 Security with MyFRITZ! For the following MyFRITZ! activities the https security protocol is used: • • • setting up a MyFRITZ! account with myfritz.net. • accessing the user interface of the FRITZ!Box. registration of the FRITZ!Box with the MyFRITZ! account. accessing the MyFRITZ! page of your FRITZ!Box over myfritz.net. The FRITZ!Box generates its own https certificate.
Firmware Update: Updating FRITZ!OS 10 Firmware Update: Updating FRITZ!OS AVM provides regular free updates of the firmware for your FRITZ!Box. This software—called FRITZ!OS—controls all of the FRITZ!Box functions. Firmware updates contain further developments of existing FRITZ!Box functions and often also introduce new functions for your FRITZ!Box. Select one of the methods described below to install new firmware on your FRITZ!Box. 10.
Performing an online update 10.2 Performing an online update With the “Online Update” function you can install the current firmware version for your FRITZ!Box quickly and conveniently. Performing a Firmware Update 1. Open the FRITZ!Box user interface (see page 26). 2. Enable the advanced view. 3. Select “System / Firmware Update / Online Update”. 4. Click “Find New Firmware”. The FRITZ!Box checks whether a FRITZ!OS update is available for your FRITZ!Box.
Performing a Manual Update 10.3 Performing a Manual Update In some cases it is not possible to perform an automatic update, for instance when the FRITZ!Box is not connected to the Internet. Then you have the option of performing a manual firmware update.
Using the Automatic Search for Updates Performing a firmware update 1. Open the FRITZ!Box user interface (see page 26). 2. Enable the advanced view. 3. Select “System / Firmware Update / Firmware File”. 4. Click the “Save Settings” button to save the current settings of your FRITZ!Box on your computer and save the export file on your computer. A prerequisite for loading a new firmware file is that your current FRITZ!Box settings have been saved in a backup file.
Using the Automatic Search for Updates Performing a firmware update 1. Open the “Overview” page. If an update for your FRITZ!Box is found, you will be notified with the message “The latest firmware is not installed: Update?”. 2. Click the “Update?” link to install the update. 3. In the next window, click “Start Firmware Update Now”. The FRITZ!OS update begins and the “Info” LED on the FRITZ!Box starts flashing.
FRITZ!Box as an Internet Router 11 FRITZ!Box as an Internet Router The FRITZ!Box connects computers in your home network with the Internet. This chapter explains the possibilities presented by using the FRITZ!Box as an Internet router and how to take advantage of them. 11.1 Child Protection: Controlling Internet Access Child protection is a function with which you can control the Internet use of individual computers or Windows users.
Child Protection: Controlling Internet Access Filtering Contents Access to web sites with inappropriate contents can be blocked using filters. The following filtering options are available: • Prevent HTTP queries: You can prevent HTTPS queries. HTTPS is used, for instance, to open Facebook, Gmail and online banking. • Permit web sites with a whitelist: – You can create a list known as a “whitelist”, in which you include all of the web sites a user is allowed to access.
Child Protection: Controlling Internet Access Child Protection, Configuration In the FRITZ!Box 3272 factory settings, unrestricted use of the Internet is set by default. Child protection for network devices and Windows users • Child Protection is enabled and configured for computers and other network devices individually. Child protection for network devices is independent of the operating system.
Port Forwarding: Making Computers Accessible from the Internet 11.2 Port Forwarding: Making Computers Accessible from the Internet With default settings in the FRITZ!Box, programs on your computer and LAN cannot be accessed from the Internet. For applications like online games and file sharing software or server services like HTTP, FTP, VPN, terminal and remote access servers you have to make your computer accessible for other Internet users.
Port Forwarding: Making Computers Accessible from the Internet ESP IPv4: GRE Within IPv4 networks you can open the firewall for the two protocols ESP and GRE which do not use ports. Exposed host IPv4: (Open firewall completely) Within IPv4 networks you can open the firewall for one computer completely. This computer is then no longer protected by the FRITZ!Box firewall.
Dynamic DNS: Name Instead of IP Address 3. The FRITZ!Box’s public IPv4 address is displayed on the “Overview” page in the “Connections” area. Every time the Internet connection is interrupted the Internet Service Provider re-assigns the IP address. The IP address may change in the process. Therefore it is a good idea to use MyFRITZ! or dynamic DNS so that the IP address can always be reached under the same name.
Access from the Internet via HTTPS, FTP and FTPS 11.4 Access from the Internet via HTTPS, FTP and FTPS Over the Internet it is possible to access the user interface and the NAS of the FRITZ!Box. With a laptop, smartphone or tablet PC you can configure settings in the FRITZ!Box user interface, take a look at your call list, or access the NAS to download or upload files.
Prioritization: Right of Way for Internet Access • FTPS (FTP over SSL) FTPS is a method for encrypting the FTP protocol. Enable this protocol to secure transmission over FTP. Enabling HTTPS, FTP and FTPS in the FRITZ!Box 11.5 1. Open the FRITZ!Box user interface (see page 26). 2. Enable the advanced view. 3. Select the “Internet / Permit Access” menu. 4. Select the “FRITZ!Box Services” page and enable the protocols you need. For more information, see the Online Help.
Prioritization: Right of Way for Internet Access • When the Internet connection is working at full capacity, the network packets of the applications of this category will always be sent first. In this case data from network applications assigned to other categories, like “Prioritized applications”, will be transmitted later. • If multiple network applications are assigned to this category, then they must share the available capacity.
VPN: Remote Access to the Home Network • If no other network applications are active, then the background applications receive the entire bandwidth. Prioritization Method in the FRITZ!Box The following algorithm is used in the FRITZ!Box to send data packets according to their prioritization: • Change in the order in which packets are sent to the Internet (upstream direction) The order of the packets the FRITZ!Box receives from the Internet (downstream direction) cannot be changed.
VPN: Remote Access to the Home Network • The configuration files for the VPN connections are created using a separate program. The program is provided free of charge and can be downloaded from the AVM web site. • A free VPN client for individual computers can also be downloaded from the AVM web site. The AVM web site offers a Service Portal which presents comprehensive information on VPN in general and in connection with the FRITZ!Box. Visit this portal to obtain more detailed information. avm.
DNS Server: Freely Selectable • The “FRITZ!VPN” VPN Client AVM offers the “FRITZ!VPN” software as a VPN client. Both the Wizard and the client can be downloaded free of charge from the VPN Service Portal on the AVM web site: avm.de/en/vpn 11.7 DNS Server: Freely Selectable DNS servers are preset in the FRITZ!Box for IPv4 and IPv6. These are the DNS servers assigned by the Internet provider. For both IPv4 and IPv6, the preset DNS server can be replaced by a free DNS server.
IPv6: The New Internet Protocol as avm.de/en. Every query is sent to the DNS server first. The DNS server resolves the URL into the corresponding IP address. There is one unambiguous IP address for every URL. The home user relies on the authenticity of the IP address returned by the DNS server. Authentic means that the response is the IP address of the desired web site, and not a faked IP address that leads to a fake web site. DNSSEC can ensure that the returned addresses are authentic.
IPv6: The New Internet Protocol IPv6-capable Services in the Home Network • • • FRITZ!NAS access via SMB or FTP/FTPS • The globally valid prefix is distributed via router advertisement. • For guest access to the wireless LAN, the home network and its wireless guests are separated by IPv6 subnetworks.
Mobile Network: Replace Faulty DSL Setting Up IPv6 on the Computer You can establish connections in the IPv6 range of the Internet only if IPv6 is installed and enabled on the computers in your home network. • IPv6 is already installed and enabled in the Windows 7 and Windows Vista operating systems. • IPv6 is not installed and enabled in standard Windows XP. You must install and enable IPv6 in order to use it. The IPv6 installation requires Service Pack 2 for Windows XP.
Mobile Network: Replace Faulty DSL 4. Configure the settings for your Internet connection over the mobile communications network. For more information, see the Online Help of the FRITZ!Box. Access to the Internet is now guaranteed, even when the DSL connection fails. As soon as the DSL connection is stable and available for at least 30 minutes, the connection will be switched back to the DSL connection.
FRITZ!Box as a Wireless Access Point 12 FRITZ!Box as a Wireless Access Point The FRITZ!Box is a wireless access point for wireless devices like notebooks, tablets or smartphones. The FRITZ!Box can establish wireless LAN connections compliant with the fast Wireless N standard. The FRITZ!Box is preconfigured with an encryption method from today’s safest method WPA2. This encryption method is supported by most of the latest wireless devices.
Connecting Wireless LAN Devices Securely with the FRITZ!Box Connecting Wireless Devices Automatically (WPS) Wireless devices that support the fast connection method WPS can be connected with the FRITZ!Box automatically. 1. Start the WPS function of your wireless LAN device. Consult the documentation of the device to find out how to start WPS. 2. Within two minutes, press the WPS button on your FRITZ!Box and hold it down until the “WLAN” LED begins flashing. 3.
Connecting Wireless Devices with the FRITZ!Box Guest Access 4. Enter the network key of the FRITZ!Box. With this, the wireless LAN connection is established. Your wireless device is integrated into your home network and can use the Internet connection of the FRITZ!Box. 12.2 Connecting Wireless Devices with the FRITZ!Box Guest Access With the FRITZ!Box you can provide your guests with an Internet connection of their own.
Switching the Wireless Radio Network On and Off by Schedule 12.3 Switching the Wireless Radio Network On and Off by Schedule You can switch the wireless radio network of the FRITZ!Box automatically according to a schedule. This function is called “Night Service”. It reduces the power consumption of the FRITZ!Box by completely turning off the WLAN module.
Extending a Wireless LAN Network 12.4 Extending a Wireless LAN Network The range of a wireless radio network is not specified.
Wireless LAN—Getting Technical 3. Select the “Advanced View” option and confirm by clicking “Apply”. 4. Select the “WLAN/Repeater” menu and follow the instructions displayed on the screen. See the Online Help of the FRITZ!Box for more information. 12.5 Wireless LAN—Getting Technical A wireless LAN radio network is based on standards defined by the Institute of Electrical and Electronic Engineers (IEEE).
Wireless LAN—Getting Technical The use of the 802.11n standard—and thus the availability of higher throughput rates—is possible only if the wireless LAN connection is secured using the WPA2 security mechanism (AES-CCMP). Setting the Right Standard in the FRITZ!Box The throughput rate that can be achieved in your wireless radio network depends on the wireless LAN standards used by the integrated devices. These wireless LAN standards must also be set in the FRITZ!Box.
Wireless LAN—Getting Technical 11n, 11g, 11b In your radio network there are only wireless devices that are compatible with one or all of the following standards: • 802.11n • 802.11g • 802.11b Set the following mode in the FRITZ!Box: 802.11n+g+b The Standard for Security IEEE 802.11i The WPA2 security mechanism is defined in the IEEE 802.11i standard. WPA2 is an extension of the familiar security mechanism WPA (Wi-Fi Protected Access).
Wireless LAN—Getting Technical Frequency Ranges Wireless LAN uses the frequency ranges at 2.4 GHz and 5 GHz as its transmission range. With the FRITZ!Box you can establish wireless LAN connections in the 2.4-GHz range. 2.4-GHz frequency band In the 2.4-GHz frequency band wireless LAN works in the same range as Bluetooth, microwave devices and various other devices like radio-controlled toys, garage-door openers and video bridges.
Wireless LAN—Getting Technical WLAN Autochannel With the WLAN Autochannel function, the FRITZ!Box automatically searches for the channel subject to the least interference. This process takes into consideration interference from radio networks in the vicinity (wireless access points) and potential sources of interference (for instance video bridges, baby monitors, microwave ovens).
The FRITZ!Box Home Network 13 The FRITZ!Box Home Network The FRITZ!Box connects your network devices, USB devices and storage devices in what we call a FRITZ!Box home network. In the home network the FRITZ!Box makes data like images, music and videos available to all connected users and allows them to share a printer. Network Devices • Network devices include, for instance, computers, game consoles and smartphones that are connected with the FRITZ!Box via a network cable connection or via wireless LAN.
The FRITZ!Box Home Network Storage (NAS) The memory of the FRITZ!Box includes storage media like flash memory or hard drives connected to the USB ports of the FRITZ!Box. What is more, the FRITZ!Box can manage online storage configured on the server of your telecommunications provider. For more information about how to access the memory in your FRITZ!Box home network safely and conveniently, see the chapter Accessing USB Memory from page 102.
Network Devices in the FRITZ!Box Home Network 14 Network Devices in the FRITZ!Box Home Network All network devices connected with the FRITZ!Box comprise a network. Network devices include, for instance, computers, game consoles and smartphones. The devices can be connected with the FRITZ!Box by cable or wirelessly. This chapter describes the network settings in the FRITZ!Box and how you can change them.
Network Settings in the FRITZ!Box For each user and each network device, you find an entry in the network overview. The columns have the following meanings: Symbol A green LED before the device name indicates that a device is actively connected with the FRITZ!Box, but not using the Internet connection at this time. A green-blue globe indicates that the device is currently using the Internet connection.
Network Settings in the FRITZ!Box Always Assigning the Same IP Address The editing mode for network devices includes the setting “Always assign this network device the same IP address”. When this setting is enabled for a network device, the DHCP server of the FRITZ!Box will always assign the same IP address to this device each time the connection is established. Starting the Computer—Wake on LAN The Wake on LAN function of computers can be enabled in the editing mode for network devices.
Network Settings in the FRITZ!Box IPv4 Settings in the FRITZ!Box The IPv4 settings of the FRITZ!Box are preset upon delivery with the following values: Factory Settings IPv4 address 192.168.178.1 Subnet mask 255.255.255.0 DHCP server enabled The IP address and the corresponding subnet mask yield the following values: Network address of the subnet 192.168.178.0 Entire IPv4 address range for the computers 192.168.178.2 192.168.178.
Network Settings in the FRITZ!Box IPv4 Address in the FRITZ!Box Upon delivery the FRITZ!Box is assigned the following IPv4 address: 192.168.178.1 If you would like to change the IPv4 address, please read through the following sections. When Does It Make Sense to Change the IPv4 Address? You should change the IPv4 address of the FRITZ!Box if the following apply to your network: • You have an existing local IPv4 network, one subnet with several computers.
Network Settings in the FRITZ!Box Only one DHCP server may be active within any network. Assigning the IP addresses via the DHCP server ensures that all of the computers connected with the FRITZ!Box are located in the same IP network. The computers can receive their IPv4 addresses from the DHCP server only if the setting “Obtain an IPv4 address automatically” is enabled in the their IP settings. For more information, see the section Obtaining an IP Address Automatically from page 96.
Network Settings in the FRITZ!Box Here too: each IPv4 address can be assigned only once. Changing Network Settings 1. Enable the advanced view in the user interface. 2. Select the “Home Network / Network” menu. 3. Select the “Network Settings” page. 4. Click the “IPv4 Addresses” or “IPv6 Addresses” button, depending on the address range you would like to change.
Network Settings in the FRITZ!Box Unique Local Adresses The communication within the local network takes place via the Unique Local Addresses (ULA). If no IPv6 Internet connection is established, the network devices do not have a ULA and communication between them is restricted. For this case you can set the FRITZ!Box such that the network devices receive the ULA from the FRITZ!Box. DHCPv6 Servers in the Home Network The FRITZ!Box is equipped with its own DHCPv6 server.
Obtaining an IP Address Automatically Setting Up Guest Access via LAN 4 The network port “LAN 4” can be configured as a guest access. Guests can then connect their laptops to the guest access with a network cable to access the Internet. The guest device does not have access to the home network. Set up the guest access as follows: 14.2 1. Open the FRITZ!Box user interface. 2. In the “Home Network / Network” menu, select the “Network Settings” page. 3. Enable the guest access.
Obtaining an IP Address Automatically • In Windows 7 and Windows Vista Click “Start”, enter “ncpa.cpl” in the search line of the Start menu, and press Enter. Entering “ncpa.cpl” in Windows 7 • In Windows XP Select “Start / Run”, enter “ncpa.cpl” and then click “OK”. Configure the settings: 1. Click the network connection between the computer and the FRITZ!Box with the right mouse button and select “Properties”. 2.
Obtaining an IP Address Automatically 5. Click “OK” to save the settings. 6. Only in Windows 8, Windows 7 and Windows Vista: Enable the options “Obtain an IPv6 address automatically” and “Obtain DNS server address automatically” for the Internet Protocol Version 6 (TCP/IPv6) as well. The computer now receives an IP address from the FRITZ!Box. Obtaining an IP Address Automatically in Mac OS X 1. Select the “System Preferences...” in the Apple menu. 2.
Obtaining an IP Address Automatically Obtaining an IP Address Automatically in Linux For comprehensive information and tips on the topic of network settings in Linux, see, for example: www.linux.org/docs/ldp/NET3-4-HOWTO-5.
USB Devices in the FRITZ!Box Home Network 15 USB Devices in the FRITZ!Box Home Network The FRITZ!Box has two USB ports to which you can connect various USB devices. All network devices in the FRITZ!Box home network can use these USB devices jointly and simultaneously. This chapter describes how to share a printer in the network, which USB devices can be used in your FRITZ!Box home network, and how to use these devices safely. 15.
Using USB Devices Safely of the FRITZ!Box (see also: Sharing a USB Printer on page 103). • You can connect a USB hub to the FRITZ!Box and use up to four USB devices at this hub. You can use USB hubs with or without a separate power supply. We recommend deploying a USB hub with its own power supply if the USB devices to be connected exceed a total current consumption of 500 mA (see also: Power Supply for USB Devices on page 100). 15.3 • You can connect a USB modem.
Configuring Access Rights 15.4 Configuring Access Rights You can protect the data on your USB storage from unauthorized access by securing the user interface of your FRITZ!Box with a password. In the “System / FRITZ!Box Password” menu you can • configure a shared password that is requested every time anyone in your home network accesses the FRITZ!Box and the connected USB storage media. • configure various FRITZ!Box users.
Sharing a USB Printer • Participants in the home network can use FTP software like FireFTP to exchange files among the FRITZ!Box storage media and workplaces. Alternatively, you can enter ftp://fritz.box in the address line of your Internet browser to access the storage media of the FRITZ!Box. If you would like to use FTP software, see the documentation of the software as well as the instructions in the Online Help of the FRITZ!Box user interface.
Sharing a USB Printer For information about how to configure a USB printer as a network printer, see the section Setting Up a USB Printer as a Network Printer on page 104. Using a USB Printer with FRITZ!Box USB Remote Connection Configure the USB printer on the FRITZ!Box with the FRITZ!Box USB remote connection if • the USB printer is an all-in-one device (fax/printer/scanner) and the entire range of functions is to be used.
Sharing a USB Printer This concludes the preparations. Continue reading in the section for your operating system. Setting Up a USB Printer in Windows 7, Vista or XP 1. Click “Start / Control Panel” and select the printer category of your operating system: – “Devices and Printers” (Windows 7) – “Printers” (Windows Vista) – “Printers and Faxes” (Windows XP) 2. Click the printer icon with the right mouse button and select “Properties” or “Printer properties”.
Sharing a USB Printer 13. Disable the “Enable bidirectional support” option and click “Apply”. The USB printer has been configured and can be used as a network printer. Setting Up a USB Printer in Windows 8 1. Press the keyboard shortcut “Windows key” + "X" and select “Control Panel” from the context menu. 2. Click on “Hardware and Sound” and select “Devices and Printers”. 3. In the menu bar, click “Add a printer”. 4.
Sharing a USB Printer If the FRITZ!Box is configured as a wireless repeater or an IP client, enter here the IP address at which the FRITZ!Box can be reached within the network. 7. In the “Print Using:” drop-down list, select the printer that is connected to the USB port of your FRITZ!Box. If the printer is not displayed, you must first install the printer drivers for this device. Consult the documentation of your printer for instructions. 8. Click “Add”.
Sharing a USB Printer Installing FRITZ!Box USB Remote Connection Install the program for FRITZ!Box USB remote connection on all of the computers with which you want to use the connected USB device. 1. Connect the USB printer to the USB port of the FRITZ!Box. 2. Open the FRITZ!Box user interface. 3. Enable the advanced view. 4. Select the “Home Network / USB Devices / USB Remote Connection”. 5. Click the “USB remote connection software” link. 6.
Sharing a USB Printer The FRITZ!Box USB remote connection is enabled. Using a USB Printer with FRITZ!Box USB Remote Connection 1. Open the FRITZ!Box USB remote connection by clicking the icon in the Windows task bar. 2. Enter in the “My FRITZ!Box” area the FRITZ!Box password. 3. Click “Refresh”. 4. Click the USB printer in the “Devices” area. The USB printer is being connected to the computer.
FRITZ!NAS: Storage in the Home Network 16 FRITZ!NAS: Storage in the Home Network With FRITZ!NAS you can display the data on the storage media of your FRITZ!Box in a clearly arranged interface. All participants in the FRITZ!Box home network can start FRITZ!NAS in a web browser and use it as a platform to access music, images, videos and documents in the FRITZ!Box memory. 16.
Saving Energy with FRITZ!Box 17 Saving Energy with FRITZ!Box The FRITZ!Box combines a variety of devices in one device: ADSL modem , wireless router and media server. This means that you generally use much less power with the FRITZ!Box than you would with several separate devices. What is more, the FRITZ!Box saves energy by reducing processing power on standby and lowering the power consumption of idle functions. The FRITZ!Box also offers various settings for energy-saving operation.
Saving Energy at the LAN Ports Enable the energy-saving function in the “Home Network / USB Devices” menu in the FRITZ!Box user interface. You can also test here whether your USB hard disk supports the energy-saving function. 17.3 Saving Energy at the LAN Ports For energy-efficient use of your gigabit LAN ports, in the “LAN settings” you can specify for each individual LAN port whether it should always operate at full power (power mode) or should reduce its energy consumption (green mode).
Help in Case of Errors 18 Help in Case of Errors For more help, see the AVM Knowledge Base in the Internet: avm.de/en/service 18.1 The User Interface Does Not Open If the FRITZ!Box user interface cannot be opened, this can have various causes. Work through the following steps in sequence until the error has been resolved. Enter http://fritz.box in the web browser Enter http://fritz.box in the web browser instead of fritz.box.
The User Interface Does Not Open Clearing the cache of your web browser If the web browser shows only an empty, white page, empty the cache: Firefox 1. Click on the orange Firefox button and select “History / Clear Recent History”. Or click “Tools” in the menu bar and select “Clear Recent History”. 2. In the “Clear Recent History” dialog, select “Everything”, and under “Details”, check only the “Cache” option. 3. Click “Clear Now”. Internet Explorer 1.
The User Interface Does Not Open Checking the Proxy Settings of the Web Browser If a proxy server is enabled in your web browser, the address of the FRITZ!Box must be entered as an exception. Check your web browser settings. Firefox 1. Click on the orange Firefox button and select “Options / Options”. Or click “Tools” in the menu bar and select “Options”. 2. Select “Advanced / Network”. 3. Under “Connection”, click the “Settings...” button. 4.
The User Interface Does Not Open Other Web Browsers Check whether the use of a proxy server is enabled. If so, enter fritz.box as an exception in the proxy server settings. For more information on the proxy settings, see the Help for your web browser. Configuring the Computer’s Network Adapter On your computer, enable the setting “Obtain an IP Address Automatically” for the network adapter used to connect to the FRITZ!Box. For instructions, see page 96.
Cannot Establish a Wireless LAN Connection 18.2 Cannot Establish a Wireless LAN Connection If you cannot establish a wireless LAN connection between your computer and the FRITZ!Box, this may be due to a variety of causes. Work through the following steps in sequence until the error has been resolved. Switching on the Computer’s Wireless LAN Adapter The wireless LAN adapter in your computer must be ready for operation.
Wireless LAN Connection Interrupted Entering the correct wireless LAN key If you establish the wireless connection manually, enter the correct network key, which is found in the user interface of your FRITZ!Box: 18.3 1. Connect a computer to the FRITZ!Box with a network cable (see page 17). 2. Open the FRITZ!Box user interface (see page 26). 3. Select “WLAN / Security”. 4. Take note of the wireless LAN key or click “Apply” and print out the wireless LAN security settings.
Wireless LAN Connection Interrupted Configure automatic radio channel selection Configure automatic selection of the radio channel in the FRITZ!Box. Then the FRITZ!Box will automatically select a radio channel with as little interference as possible. FRITZ!Box 3272 1. Open the FRITZ!Box user interface (see page 26). 2. Select “WLAN / Radio Channel”. 3. Enable the option “Set radio channel settings automatically (recommended)” 4. Click “Apply”.
Taking FRITZ!Box out of Operation 19 Taking FRITZ!Box out of Operation In this chapter you receive tips and recommendations for taking the FRITZ!Box out of operation. Please also follow our instructions for the correct disposal of waste equipment on page 131. 19.1 Restoring Factory Settings When the factory settings are restored to the FRITZ!Box, all of the settings in the FRITZ!Box are restored to their condition upon delivery.
Uninstalling Supplementary Software Loading Factory Settings We recommend saving the settings configured on your FRITZ!Box in a backup file (see page 28). 1. In the FRITZ!Box user interface, select the “System / Reset” menu. 2. Select the “Factory Settings” tab. 3. Click the “Load Factory Settings” button. The FRITZ!Box is reset to its factory settings. All settings made during operation will be overwritten. 19.
Uninstalling Supplementary Software Uninstalling Programs in Windows 7 1. Open “Start / Control Panel / Programs”. 2. Under “Programs and Features”, click “Uninstall a program”. 3. Mark the AVM program you want to remove in the list. 4. Click the “Uninstall/Change” button. The program will be removed. Uninstalling Programs in Windows Vista 1. Open “Start / Settings / Control Panel / Programs and Functions”. 2. Mark the AVM program you want to remove in the list. 3.
Technical Specifications 20 Technical Specifications Facts worth knowing: Here you will find comprehensive technical data on your FRITZ!Box 3272. 20.1 Ports and Interfaces • ADSL/ADSL2/ADSL2+ modem compliant with DT AG 1TR112 (also IP-based, Annex J), or alternatively ITU G.992.1, ITU G.992.3 or ITU G.992.
User Interface and Display 20.3 20.4 User Interface and Display • Configuration and status messages via a web browser on a connected computer • five LEDs indicate the condition of the device Physical Specifications • • • Dimensions (W x D x H): approx.
Customer Service 21 Customer Service Be it product documentation, frequently asked questions, tips or support: this chapter presents information on all important service topics. 21.1 Documentation on the FRITZ!Box To take advantage of all commands and features of your FRITZ!Box, consult the following documentation: Help In the FRITZ!Box user interface you can open the comprehensive Online Help by clicking the “Help” icon and the “Help” buttons.
Feedback on FRITZ!Box AVM Knowledge Base In our AVM Knowledge Base you can find answers to your questions and specific solutions to your problems. The AVM Knowledge Base is located in the “Service” area of the AVM web site: avm.de/en/service 21.3 Feedback on FRITZ!Box In various places in the user interface, the FRITZ!Box offers you the opportunity to send your concrete feedback to AVM. Your feedback helps us to continually improve the FRITZ!Box.
Support from the Support Team – Connecting the Computer to the FRITZ!Box from page 17 2. If you have any problems, seek first aid by consulting the chapter Help in Case of Errors from page 113. This chapter also presents tips on problems with establishing connections. 3. Read our tips from the AVM Knowledge Base in the “Service” area. avm.de/en/service This site contains answers to questions our customers have frequently asked our Support team.
21.5 Manufacturer’s Warranty We offer a manufacturer’s warranty of five years on the hardware of this original product. The warranty period begins with the purchase date from the first end user. Compliance with the warranty period can be proven by submission of the original invoice or comparable documents. This warranty does not restrict your warranty rights based on the contract of sale or other statutory rights.
Legal Notice Legal Notice This documentation and the software it describes are protected by copyright. AVM grants the nonexclusive right to use the software, which is supplied exclusively in object code format. The licensee may create only one copy of the software, which may be used exclusively for backup use. AVM reserves all rights that are not expressly granted to the licensee.
Declaration of CE Conformity The manufacturer AVM GmbH Alt-Moabit 95 D 10559 Berlin Germany herewith declares that the product FRITZ!Box 3272 ADSL wireless router complies with the following directives: 1999/5/EC R&TTE Directive: Radio Equipment and Telecommunications Terminal Equipment 2009/125/EC EU directive: ecodesign requirements for energy-related products 2011/65/EU EU directive: on the restriction of the use of certain hazardous substances in electrical and electronic equipment The following n
Disposal Information In accordance with European regulations, the FRITZ!Box 3272, as well as all devices and electronic components contained in the package, may not be disposed with household waste. Please bring FRITZ!Box 3272 to a collection point in your local community for the disposal of electric and electronic appliances after use. Symbol for the separate collection of electric and electronic devices Note the symbol for the separate collection of electric and electronic devices.
Drilling Template See the next page for a drilling template. Use the drilling template as a guide to mark the holes needed to mount the FRITZ!Box on a wall. Be sure to print out the page with the drilling template in its original size, or 100%. Do not enlarge it, adjust its size, reformat or rescale it in your printer settings.
FRITZ!Box 3272 133
Index D declaration of CE conformity . . . . . . . 130 DHCP server (integrated) . . . . . . . . . . . 92 disposal. . . . . . . . . . . . . . . . . . . . . . . . 131 DNS server. . . . . . . . . . . . . . . . . . . . . . . 71 DNSSEC . . . . . . . . . . . . . . . . . . . . . . . . . 71 documentation . . . . . . . . . . . . . . . . . . 125 drilling template . . . . . . . . . . . . . . . . . 132 dynamic DNS. . . . . . . . . . . . . . . . . . . . . 65 A access rules. . . . . . . . . . . . . . . . . . . . . .
FRITZ!NAS password protection . . . . . . . . . . 110 prerequisites. . . . . . . . . . . . . . . . . 110 starting . . . . . . . . . . . . . . . . . . . . . 110 FRITZ!OS . . . . . . . . . . . . . . . . . . . . . . . . 55 FRITZ!WLAN USB Stick . . . . . . . . . . . . . 22 Internet connection configuring . . . . . . . . . . . . . . . . . . . 32 configuring for DSL . . . . . . . . . . . . . 32 over LAN1 . . . . . . . . . . . . . . . . . . . . 34 via cable modem . . . . . . . . . . . 15, 33 via mobile network. .
N R NAS . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 network changing settings . . . . . . . . . . . . . . 94 connection . . . . . . . . . . . . . . . . . . . 17 factory settings . . . . . . . . . . . . . . . . 91 IPv4 settings . . . . . . . . . . . . . . . . . . 91 network hub/switch . . . . . . . . . . . . 18 network overview . . . . . . . . . . . . . . 88 network settings . . . . . . . . . . . . . . . 88 prioritization . . . . . . . . . . . . . . . . . . 67 UPnP settings . . . . . . . . .
U W UMTS Internet access . . . . . . . . . . . . . . . . 33 Internet connection . . . . . . . . . . . . 16 substitute connection . . . . . . . . . . 74 uninstalling programs. . . . . . . . . . . . . 121 uninstalling supplementary software . . . . . . . . . . . . . . . . . . . . . . 121 update . . . . . . . . . . . . . . . . . . . . . . . . . . 55 updating firmware. . . . . . . . . . . . . . . . . 55 UPnP settings . . . . . . . . . . . . . . . . . . . . 95 USB accessing memory . . . . . . . . . . . .
