Operating Instructions and Installation Instructions

FRITZ!Box 3272 10
LEDs
2.3 LEDs
Five LEDs are built into the top of the FRITZ!Box 3272, which
flash or light up to display various connection statuses and
events.
LED Condition Meaning
Power on
• Device has electrical power and the DSL line is ready
for operation
flashing
• Device has electrical power and the connection to DSL
is being established or has been interrupted
LAN on Network connection is active to at least one connected de-
vice (network adapter or hub/switch)
WLAN on Wireless LAN function is enabled
flashing
• Switching the wireless LAN function on or off
• Adopting the wireless LAN settings
• Performing WPS
• WPS procedure aborted: More than two wireless devic-
es are performing WPS at the same time. Repeat the
WPS procedure.
DSL on Internet connection is active
Info flashing
• Updating FRITZ!OS , the firmware of your FRITZ!Box
• Online meter reached the defined value, or another
event defined in the user interface under “System /
“Info” Display” is signaled
flashing red Error: Open the FRITZ!Box user interface and follow the in-
structions on the “Overview” page