Operating Instructions and Installation Instructions

FRITZ!Box 3272 124
User Interface and Display
20.3 User Interface and Display
• Configuration and status messages via a web browser on
a connected computer
• five LEDs indicate the condition of the device
20.4 Physical Specifications
• Dimensions (W x D x H): approx. 210 x 25 x 155 mm
• Supply voltage: 230 V / 50 Hz
• Maximum power consumption: 12 W
• FRITZ!OS can be updated
• Conforms to CE standards
• Ambient Conditions
– Operating temperature: 0 °C – +40 °C
– Storage temperature: -20 °C – +70 °C
– relative humidity (operation): 10% – 90%
– relative humidity (idle): 5% – 95%
20.5 Cable
Network Cable
The network cable (yellow ) of the FRITZ!Box 3272 is a stan-
dard category 5 (Cat 5) Ethernet cable. Please use a standard
STP-type (Shielded Twisted Pair) Ethernet cable of category 5
(Cat 5) to replace or extend the Ethernet cable. To extend the
cable you will need a shielded RJ45 double coupling (Cat 5)
with a 1:1 pin assignment. You can use both straight cables
and crosslink cables. All components are available from spe-
cialized vendors.
When components of a category smaller than Cat 5 are used,
reduced transmission rates may result.
AVM recommends using a network cable no more than
100 meters long.