Operating Instructions and Installation Instructions

FRITZ!Box 3272 20
Connecting Computers Wirelessly over Wireless LAN
Establishing a Wireless LAN Connection Using WPS
The FRITZ!Box supports WPS (Wi-Fi Protected Setup). Wireless
devices that also support WPS can be connected with your
FRITZ!Box securely using this method. All of the necessary
wireless LAN security settings are transferred in the process.
There are two kinds of WPS: the push-button method and the
PIN method.
WPS with the Push-button Method
The push-button method (WPS PBC) can be used if your wire-
less LAN device is equipped with a WPS button, or if WPS can
be enabled via the control software of the wireless LAN device.
1. Briefly press the “WPS” button of the FRITZ!Box.
2. When the “WLAN” LED flashes, start WPS on the wireless
LAN device. You have two minutes for this task.
How to start WPS depends on the wireless LAN device.
Either press a button on the wireless LAN device, or start
WPS in the device’s control software.
The connection between the FRITZ!Box and the computer is
established automatically. The computer is now connected
with the FRITZ!Box.
WPS with the PIN Method
If your wireless LAN device supports WPS, but does not have
a button to start the push method nor any possibility to en-
able it in its control software, use the PIN method to establish
the wireless LAN connection.
WLAN
DSL
Info
LAN
Power