Operating Instructions and Installation Instructions

FRITZ!Box 3272 24
Connecting Computers Wirelessly over Wireless LAN
values set in the FRITZ!Box. If you changed the precon-
figured values in the FRITZ!Box, then enter these
changed values in the wireless LAN software.
3. Confirm your entries using the relevant button in the us-
er interface (for instance, “OK” or “Connect”).
Now your wireless LAN device and the FRITZ!Box are connect-
ed with each other wirelessly.
If the Wireless LAN Device Does Not Support WPA
If your wireless LAN device does not support WPA encryption,
you must convert the encryption set in the FRITZ!Box to WEP.
For this you must change the wireless LAN settings in the
FRITZ!Box.
1. Connect the FRITZ!Box and the computer using the net-
work cable (yellow ) (see the section Connecting Compu-
ters to the LAN Port on page 17).
2. Open the FRITZ!Box user interface (see the section
Opening the User Interface on page 26).
3. Select the “WLAN / Security” menu.
4. Then select WEP encryption and enter a network key.
5. Click the “Apply” button.
A window is displayed with the wireless LAN security set-
tings.
6. Make a note of the settings or print out the page.
SSID (name of the
wireless radio net-
work)
FRITZ!Box 3272
Encryption method WPA2 (AES-CCMP)
Encryption WPA2-PSK (AES)
Key The key is printed on the sticker at-
tached to the bottom of housing.
Network mode Infrastructure