Operating Instructions and Installation Instructions

FRITZ!Box 3272 32
Configuring an Internet Connection in the FRITZ!Box
7 Configuring an Internet Connection in the FRITZ!Box
Once you have connected the FRITZ!Box to your Internet connection,
you must configure the Internet connection in the FRITZ!Box user in-
terface so that the FRITZ!Box can establish the connection to your In-
ternet service provider and connect to the Internet.
The sequence and number of steps required to configure your Internet
connection depend on the kind of connection, the desired operating
mode, and the Internet service provider.
7.1 Configuring an Internet Connection for DSL
Enter the Internet account information you received from your
DSL/Internet provider. These data are required to configure
the Internet connection.
Configuring an Internet Connection Automatically
If your Internet service provider arranges for the service of au-
tomatically configuring your Internet connection, the auto-
matic configuration will be performed right after the
FRITZ!Box is connected. No additional settings for the Inter-
net connection have to be configured in the FRITZ!Box. To
start automatic configuration, some providers require that
you enter a start code.
Configuring an Internet Connection Using the Wizard
1. Open the FRITZ!Box user interface (see page 26).
2. Select the “Wizards” entry in the menu.
3. Click the “Check Internet Connection” Wizard and follow
the instructions.
When the Wizard is finished, your Internet connection has
been configured.
Your Internet service provider also supplied information
about the configuration of your Internet connection. Always
perform the Internet connection setup as described by your
provider.