Operating Instructions and Installation Instructions

FRITZ!Box 3272 94
Network Settings in the FRITZ!Box
Changing Network Settings
1. Enable the advanced view in the user interface.
2. Select the “Home Network / Network” menu.
3. Select the “Network Settings” page.
4. Click the “IPv4 Addresses” or “IPv6 Addresses” button,
depending on the address range you would like to
change.
IPv6 Settings in the FRITZ!Box
The following settings options for IPv6 are found in the ad-
vanced view in the “Home Network / Network” menu on the
“Network Settings” page.
Additional IPv6 Routers in the Home Network
• IPv6 Prefixes from Other IPv6 Routers
You can allow the network devices connected to the
FRITZ!Box to receive IPv6 prefixes announced by other
IPv6 routers in the local network.
• Also announce DNSv6 server via router advertisement
With this setting you specify that the FRITZ!Box announc-
es the local DNSv6 server in the local network via router
advertisement. Alternatively, the network devices can
identify the local DNSv6 server via DHCPv6.
IPv6 Settings
Click the “IPv6 Addresses” button to configure settings for
the IPv6 addresses in the local network.
Here too: each IPv4 address can be assigned only once.
Please note that changes to the network settings in the
FRITZ!Box may make it necessary to adjust the network set-
tings of your computers so that you can continue to access
the FRITZ!Box user interface.