Instruction Manual

After finishing mounting the antenna, adjust the position of the antenna until the best picture and

sound quality is achieved (Usually facing the direction of the transmitting tower). Antenna mount is

designed to be turned 45° to left and right for easy positioning. Fix the antenna at its best receiving

position by tighten the fix position nut at the bottom of the mount. Cable management can then be

performed to improve overall appearance and avoid tripping over. Extra safety wire can be installed

through the pre-drilled hole as indicated below to prevent falling in case of bracket failure.

Please note, for best reception. Position antenna at the highest possible location, as blockage in line of

sight between antenna and transmission tower may cause signal loss, having the antenna installed at

highest possible location will minimize the chance of signal blockage.

This product is classed as Electrical or Electronic equipment and should not be disposed

with other household or commercial waste at the end of its useful life. The goods must be disposed of

according to your local council guidelines.

Errors and omissions excepted.