Manual

ManualsBrandsAVSL ManualsHardware130.035 AMS SERIES

AMS SERIES

AERIAL DISTRIBUTION

AMPLIFIERS WITH DC PASS

Item ref: 130.034UK, 130.035UK

User Manual

INTRODUCTION:

Thank you for choosing this Mercury AMS series distribution amplifier. It is designed to amplify weak

FM/DAB/TV signals from the aerial and distribute them to multiple outputs, ideal for use with passive

indoor aerials or to distribute the analogue RF2 signal from a satellite receiver.

CAUTION

Please read through this manual carefully before use. This product is strictly for indoor

use only, please install this product in dry and cool environment and keep out of the

reach of children and pets.

Summary of content (5 pages)

PAGE 1
AMS SERIES AERIAL DISTRIBUTION AMPLIFIERS WITH DC PASS Item ref: 130.034UK, 130.035UK User Manual CAUTION Please read through this manual carefully before use. This product is strictly for indoor use only, please install this product in dry and cool environment and keep out of the reach of children and pets. INTRODUCTION: Thank you for choosing this Mercury AMS series distribution amplifier.
PAGE 2
PRODUCT FEATURES: Easy to install, plug and play. Built in low noise high gain amplifier to boost weak signals from the aerial. LED power indicator. Integrated wall mount. DC pass allows the control of satellite via Magic Eye remote extender (124.157UK). Short circuit protection and maximum output limiter prevents overload. SPECIFICATION: Item Ref No of outputs Frequency response Max output level Gain per split Noise Impedance Power Dimensions Weight AMS02 130.
PAGE 3
The diagram above shows a basic example of distributing TV signal from a single aerial source. If all TV sets are digital TV compatible, set top boxes will not be required, and the aerial can be plugged into the amplifier directly.
PAGE 4
Distribution of satellite signal: The diagram above shows how the analogue signal from a satellite receiver can be distributed. Because the AMS series amplifier is designed with DC pass, all 4 TV’s can be set up with “Magic eye” remote extension units, which allow remote control of the satellite receiver. This is achieved by connecting the RF2 output of the satellite receiver to the input of the amplifier.
PAGE 5
Distribution of VHF/UHF AMS amplifiers can also be used to distribute both radio and TV signals, this will required a VHF/UHF diplexer to combine the signals to a single input. This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines. Errors and omissions excepted. Copyright© 2014. AVSL Group Ltd 130.034UK, 130.