User Manual

AMHG02C

2-WAY DISTRIBUTION AMPLIFIER

WITH COAX CONNECTORS

Item ref: 130.037UK

User Manual

SPECIFICATION:

Power: 230Vac, 50Hz

Frequency range: 47 – 862MHz

Gain per split: 10-20dB

Noise : <4dB

Impedance: 75Ω

Max output level: 90dBuV

Dimensions & weight: 115 x 75 x 95mm, 250g

INTRODUCTION:

Thank you for choosing this Mercury distribution amplifier. It is designed to amplify weak

FM/DAB/TV signals from aerial/TV receiver and distribute to 2 TV outputs. Simply plug and play,

with no need to set up.

CAUTION

Please read through this manual carefully before use. This product is strictly

for indoor use only, please install this product in dry and cool environment

and keep out of the reach of children and pets.

PAGE 1
AMHG02C Item ref: 130.037UK User Manual 2-WAY DISTRIBUTION AMPLIFIER WITH COAX CONNECTORS CAUTION Please read through this manual carefully before use. This product is strictly for indoor use only, please install this product in dry and cool environment and keep out of the reach of children and pets.
PAGE 2
PRODUCT FEATURES: Built in low noise high gain amplifier to boost weak signals from aerial. LED power indicator. Short circuit protection. Variable gain control allows fine adjustment of signal level. INSTALLATION: Before install, to avoid danger of electric shock, please ensure that all equipment is turned off and disconnected from the mains supply.