User Manual

130.037UK User Manual

PRODUCT FEATURES:

- Built in low noise high gain amplifier to boost weak signals from aerial.

- LED power indicator.

- Short circuit protection.

- Variable gain control allows fine adjustment of signal level.

INSTALLATION:

Before install, to avoid danger of electric shock, please ensure that all equipment is turned off and

disconnected from the mains supply. Please ensure there is sufficient ventilation space available in

order for the unit to work properly, preferably minimum of 10cm from the side and 10 cm from the

top.

1. Connect the aerial/TV receiver to the IN socket on the amplifier.

2. Connect TV sets to the OUT sockets on the amplifier.

3. Connect mains power to amplifier and TV and switch TV on.

4. Adjust the centre rotary switch, until best picture and sound quality is achieved.

Please note:

This amplifier has no serviceable parts.

To clean the unit please remove it from the mains socket and wipe dust off with a dry cloth.

In case of a fault, please contact your dealer.

DO NOT attempt to open the case as it contains high voltages which could be lethal.

Keep unit away from moisture and heat sources.

To avoid interference from unused output, please add a 75Ω coax terminator to the unused output.

This product is classed as Electrical or Electronic equipment and should not be disposed

with other household or commercial waste at the end of its useful life. The goods must be disposed of

according to your local council guidelines.

Errors and omissions excepted.