QTFX-B4 Professional Bubble Machine Item ref: 160.
Introduction Thank you for choosing the QTFX-B4 professional bubble machine as part of your stage effects setup. This machine is the highest output model in the range and will provide consistent large area coverage. Please read and keep this manual to ensure maximum performance and avoid damage through misuse. Unpacking Your QTFX-B4 should reach you in good condition and should be supplied with IEC mains lead(s) and a wired handheld remote control.
Layout 1. 2. 3. 4. 5. 6. Bubble wand Bubble wheel Tank (pour fluid in here) Front fans (do not cover) Carry handle Castor wheels Rear panel 7. Rear Fans 8. IEC Power Socket 9. ON/OFF/REMOTE Switch 10. Fluid drain tap 11. Remote Socket Operation The QTFX-B4 is operated by a 3-position rocker switch. The centre position is off. Press this switch to the left for constant bubble output. Press this switch to the right for remote control of the bubble effect.
Remote control When the remote control is connected and the rear rocker switch is pressed to the REMOTE setting, pressing the button on the remote produces bubble output on demand. Replacing the fuse Disconnect from the main power supply first, then remove the fuse holder part of the IEC Socket to reveal the fuse. Replace the correct fuse rating as stated on the fixture safety label or in the user guide. Lock the fuse holder cover back into place.
160.
