Manual

160.564UK User Manual

Remote control

When the remote control is connected and the rear rocker switch is pressed to the REMOTE

setting, pressing the button on the remote produces bubble output on demand.

Replacing the fuse

Disconnect from the main power supply first, then remove the fuse holder part of the IEC Socket to reveal the

fuse. Replace the correct fuse rating as stated on the fixture safety label or in the user guide. Lock the fuse

holder cover back into place.

General maintenance

To maintain optimum performance and minimize wear, the item should be cleaned frequently. Usage and

environment are contributing factors in determining frequency. As a general rule, fixtures should be cleaned

after each use to avoid dust build-up and blockages, which can result in poor performances, overheating and

breakages. Be sure to power off fixture before conducting maintenance.

Unplug fixture from power. Use a vacuum or air compressor and a soft brush to remove dust collected on

external vents and internal components. Clean the external case when the fixture is cold with a dry cloth or

tissue, and drag dirt and grime to the outside case.

To ensure a continuing high performance it is recommended to use warm water to clean the internal tank.

Specifications

Power supply

230Vac, 50Hz

Number of wheels

Number of wands per wheel

RPM (per wheel)

Dimensions

380 x 450 x 470mm

Weight

10.5kg

Disposal

Please disposal of the unserviceable device according to the current statutory requirements.

Errors and omissions excepted.