User Manual

CAB41PK
10W BASS AMPLIFIER
User Manual
Layout
1.
Bass input
5.
Treble control
2.
Master volume control
6.
Headphones output
3.
Bass control
7.
Auxiliary input
4.
Middle control
8.
Power switch
Setting up and operation
Your CAB41 bass is supplied with a guitar lead with a 6.3mm jack on each end
Plug one end into the bass jack socket and the other end into the guitar input on the amplifier (1)
The bass amplifier is supplied with IEC lead(s) for connecting to the mains
Connect the IEC at the rear of the amplifier and the mains plug to an appropriate mains outlet
Turn Master volume (2) fully down and set Bass, Middle and Treble controls (3, 4, 5) to the 12 o’clock position
Switch the power on (8)
Play the bass with volume and tone controls turned fully up and gradually increase Master volume
The tone of the bass can be changed by adjusting the Bass, Middle and Treble controls (3, 4, 5)
A 3.5mm jack Aux input is provided for playing along to a track from an audio player
Connect a an mp3 player, smart phone or other line level source to the Aux Input and press play
Use volume controls on the playback device and bass to achieve the best volume balance of both
If silent practice is preferred, plug headphones in via the other 3.5mm socket, which will mute the speaker
After use, turn down Master volume and switch off power. Unplug from mains when not in use for long periods
Specifications
Power supply
230Vac, 50Hz (IEC) 18W
Output power
10Wrms
Dimensions
250 x 280 x 125mm
Weight
3.4kg
Errors and omissions excepted.
Copyright© 2013. AVSL Group Ltd.

Summary of content (2 pages)