CM-DSP Compact Mixers Item ref: 170.830UK, 170.832UK, 170.
Introduction Thank you for choosing a Citronic CM-DSP series mixer. This product has been designed to offer reliable, high quality mixing for stage and/or studio applications with unfailing consistency. In order to gain the best results from this equipment and avoid damage through misuse, please read and follow these instructions and retain for future reference. Warning: To prevent the risk of fire or electric shock, do not expose components to rain or moisture.
Control Panel 1. Stereo channel L + R 6.3mm jack inputs 16. Channel auxiliary level control 2. Stereo channel Left + Right RCA inputs 17. Channel effect level control 3. Left + Right Recording RCA outputs 18. Channel fader 4. Auxiliary output 6.3mm jack 19. L+R balanced main output XLR 5. Effect output 6.3mm jack 20. L+R balanced main output TRS jack 6. Headphones output stereo 6.3mm jack 21. DSP programme select 7. Global phantom power switch & indicator 22.
Rear Panel 31. 12Vac 1500mA power adaptor input 32. SD card slot for digital audio player 33. USB input for digital audio player Connection Before connecting to amplifier or other equipment, turn down all volume controls to avoid loud noises which may cause damage to other equipment. Always switch amplifier power on last in line with volume levels down. Using good quality 6.
Recording equipment can be connected via the “REC” outputs using a twin RCA lead and the 6.3mm jack AUX output can be connected to monitoring or external processing equipment if required. Individual levels can be adjusted to the AUX output via the individual channel AUX controls. Overall auxiliary send level is governed by the master AUX control.
Use the PAN control to position the channel input either to the left or right side of the stereo field. This can be useful to help separate and define sounds within a mix but be aware that extreme settings can be counter-productive by removing the channel from certain listening positions. Use the AUX control to feed the correct amount of the channel signal to the AUX output. This routing is “Pre-fader” and is independent from the channel fader setting.
Specifications Model Stock Code Power Supply Phantom Power Frequency Response Mic/Line inputs (bal/unbal) Stereo Input (unbal) SNR: Mic Inputs SNR: Line Inputs SNR: Stereo Input EQ: High EQ: Mid EQ: Low Effects Outputs: Main (L + R) AUX, EFF, REC out Phones Output Dimensions (mm) Weight CM4-DSP 170.830UK CM8-DSP 170.832UK CM12-DSP 170.834UK 12Vac 1500mA (included) Switchable +48V (XLR inputs) 20Hz - 20kHz 2 x XLR/jack 4 x XLR/jack 6 x XLR/jack 6.3mm jack/RCA (-8 to +15dB / +13 to +60 parallel) 120dB E.
Troubleshooting No power LED on control panel Power LED is on but no other LEDs and no output Power and VU LEDs lit but no output USB/SD player will not play audio from media Volume range lacking Output is very loud or distorted Output is working but at very low level Feedback (loud squealing or howling from mics) Ensure power adapter is working and connected properly Ensure mains outlet voltage is OK and as stated on adaptor Check input signals and condition of connection leads Check jack is connecte
