User Manual

3 Wizard & Main Interface

3.1 Startup Wizard

The disk icons will be shown on the top of the startup interface. You can view the number and

status of each disk quickly and conveniently through these icons ( : no disk; : unavailable

disk; : RW available disk).

You can quickly configure the NVR by wizard setup to make the NVR work normally. You

must configure the wizard if you start the NVR for the first time (or click “Skip” to cancel the

wizard next time).

Click “Wizard Setup” to start wizard. The setting steps are as follows.

① System Login. Set your own password or use the default when you use the wizard for the

first time (the default username of the system is admin and the default password of admin is

123456); select the login username and enter the corresponding password next time.

Click “Edit Security Question” to set questions and answers for password security of admin. If

you forget the password, please refer to Q4 in Appendix A FAQ for details.

Click “Next” to continue or click “Cancel” to exit the wizard.