User Manual

25
 Add Manually
Input the IP address, port, username and password of the camera and then select the protocol.
Click “Test” to test the effectiveness of the input information and then click “Add” button (you
can input one camera’s information or above such as IP address, username and password before
clicking “Add” button). Click to delete the camera. Click “Default Password” to set the
default username and password of each camera.
4.1.2 Edit Camera
Click “Edit Camera” in the setup panel to go to the interface as shown below. Click to
view the live image of the camera in the popup window. Click to edit the camera (see
Add camera in 3.1Startup Wizard for details). Click to delete the camera.
Note:
If you use the NVR with the PoE network ports, the IP cameras (with PoE function) which
directly connect to the PoE port of the NVR will be displayed automatically in the camera list.
Refer to the picture below. The IP camera which occupies the PoE resource has a prefix shown
before its camera name. The prefix consists of PoE plus PoE port number. The IP camera which
connects to the PoE port cannot be deleted from the camera list manually.