User Manual

camera number of the current screen mode. Double click the sequence view interface to pause

the view; double click again to restore the view. Click to stop the view.

5.2.3 Camera Group View In Sequence

You can start camera group view in sequence if camera group has been created (see 4.2.1 Add

Camera Group for details).

① Go to the live preview interface and then select a camera window.

② Double click one camera group on the right side of the interface. The cameras in the group

will start camera group view one by one in the selected camera window.

You can also drag the group directly to any preview window. Right click on the group view

window and then click “Close Dwell” button to stop the view.

5.2.4 Scheme View In Sequence

Click StartSettingsSystemBasicOutput Settings to go to the interface as shown below.

Area ① displays all the dwell schemes; area ② shows the detailed information of the scheme;

area ③ displays all the cameras and groups; area ④ is the tool bar ( : clear button; :

favourite button, click it to pop up a window, enter the display mode name in the window and

then click “OK” to save the current display mode; other buttons are screen mode buttons).